Current File : //usr/share/initramfs-tools/hooks/cryptroot
#!/bin/sh
PREREQ=""
prereqs()
{
echo "$PREREQ"
}
case "$1" in
prereqs)
prereqs
exit 0
;;
esac
. /usr/share/initramfs-tools/hook-functions
. /lib/cryptsetup/functions
TABFILE="/etc/crypttab"
# crypttab_find_and_print_entry($target)
# Find the crypttab(5) entry for the given (unmangled) $target and
# print it - preserving the mangling - to FD nr. 3; but only if the
# target has not already been processed during an earlier function
# call. (Processed target names are stored in
# $DESTDIR/cryptroot/targets.)
# Return 0 on success, 1 on error.
crypttab_find_and_print_entry() {
local target="$1"
local _CRYPTTAB_NAME _CRYPTTAB_SOURCE _CRYPTTAB_KEY _CRYPTTAB_OPTIONS
if ! grep -Fxqz -e "$target" -- "$DESTDIR/cryptroot/targets"; then
printf '%s\0' "$target" >>"$DESTDIR/cryptroot/targets"
crypttab_find_entry "$target" || return 1
crypttab_parse_options --missing-path=warn || return 1
crypttab_print_entry
fi
}
# crypttab_print_entry()
# Print an unmangled crypttab(5) entry to FD nr. 3, using CRYPTTAB_*
# and _CRYPTTAB_* values.
# _CRYPTTAB_SOURCE is replaced with UUID=<uuid> if possible (eg, for
# LUKS), unless the value starts with /dev/disk/by- or /dev/mapper/,
# or is already a device specification (such as LABEL= or PARTUUID=).
# If the entry uses the 'decrypt_derived' keyscript, the other
# crypttab(5) entries it depends on are (recursively) printed before
# hand.
# Various checks are performed on the key and crypttab options, but no
# parsing is done so it's the responsibility of the caller to call
# crypttab_parse_options().
# Return 0 on success, 1 on error.
crypttab_print_entry() {
local DEV MAJ MIN uuid keyfile
if _resolve_device "$CRYPTTAB_SOURCE"; then
if [ "$(dmsetup info -c --noheadings -o devnos_used -- "$CRYPTTAB_NAME" 2>/dev/null)" != "$MAJ:$MIN" ]; then
cryptsetup_message "ERROR: $CRYPTTAB_NAME: Source mismatch"
elif [ "${_CRYPTTAB_SOURCE#[A-Za-z]*=}" = "$_CRYPTTAB_SOURCE" ] && \
[ "${CRYPTTAB_SOURCE#/dev/disk/by-}" = "$CRYPTTAB_SOURCE" ] && \
[ "${CRYPTTAB_SOURCE#/dev/mapper/}" = "$CRYPTTAB_SOURCE" ] && \
uuid="$(_device_uuid "$DEV")"; then
_CRYPTTAB_SOURCE="UUID=$uuid"
fi
# on failure _resolve_device() prints a warning and we try our
# luck with the unchanged _CRYPTTAB_SOURCE value
fi
# if keyscript is set, the "key" is just an argument to the script
if [ -z "${CRYPTTAB_OPTION_keyscript+x}" ] && [ "$CRYPTTAB_KEY" != "none" ]; then
crypttab_key_check || return 1
case "$CRYPTTAB_KEY" in
$KEYFILE_PATTERN)
mkdir -pm0700 -- "$DESTDIR/cryptroot/keyfiles"
# $CRYPTTAB_NAME can't contain '/' (even after unmangling)
keyfile="/cryptroot/keyfiles/$CRYPTTAB_NAME.key"
if [ ! -f "$DESTDIR$keyfile" ] && ! copy_file keyfile "$CRYPTTAB_KEY" "$keyfile"; then
cryptsetup_message "WARNING: couldn't copy keyfile $CRYPTTAB_KEY"
fi
_CRYPTTAB_KEY="/cryptroot/keyfiles/$_CRYPTTAB_NAME.key" # preserve mangled name
;;
*)
if [ "$usage" = rootfs ]; then
cryptsetup_message "WARNING: Skipping root target $CRYPTTAB_NAME: uses a key file"
return 1
elif [ "$usage" = resume ]; then
cryptsetup_message "WARNING: Resume target $CRYPTTAB_NAME uses a key file"
fi
if [ -L "$CRYPTTAB_KEY" ] && keyfile="$(readlink -- "$CRYPTTAB_KEY")" &&
[ "${keyfile#/}" != "$keyfile" ]; then
cryptsetup_message "WARNING: Skipping target $CRYPTTAB_NAME: key file is a symlink with absolute target"
return 1
elif [ -f "$CRYPTTAB_KEY" ] && [ "$(stat -L -c"%m" -- "$CRYPTTAB_KEY" 2>/dev/null)" != "/" ]; then
cryptsetup_message "WARNING: Skipping target $CRYPTTAB_NAME: key file is not on the root FS"
return 1
fi
if [ ! -e "$CRYPTTAB_KEY" ]; then
cryptsetup_message "WARNING: Target $CRYPTTAB_NAME has a non-existing key file $CRYPTTAB_KEY"
else
_CRYPTTAB_KEY="/FIXME-initramfs-rootmnt$_CRYPTTAB_KEY" # preserve mangled name
fi
esac
fi
if [ -n "${CRYPTTAB_OPTION_keyscript+x}" ]; then
copy_exec "$CRYPTTAB_OPTION_keyscript"
elif [ "$CRYPTTAB_KEY" = "none" ]; then
ASKPASS="y"
fi
if [ "${CRYPTTAB_OPTION_keyscript-}" = "/lib/cryptsetup/scripts/decrypt_derived" ]; then
# (recursively) list first the device to derive the key from (so
# the boot scripts unlock it first); since _CRYPTTAB_* are local
# to crypttab_find_and_print_entry() the new value won't
# override the new ones
crypttab_find_and_print_entry "$CRYPTTAB_KEY"
fi
printf '%s %s %s %s\n' \
"$_CRYPTTAB_NAME" "$_CRYPTTAB_SOURCE" "$_CRYPTTAB_KEY" "$_CRYPTTAB_OPTIONS" >&3
}
# get_resume_devno()
# Return the device ID(s) used for system suspend/hibernate.
get_resume_devno() {
local dev filename
# uswsusp
for filename in /etc/uswsusp.conf /etc/suspend.conf; do
[ -e "$filename" ] || continue
dev="$(sed -nr '/^resume device\s*[:=]\s*/ {s///p;q}' "$filename")"
if [ -n "$dev" ] && [ "$dev" != "<path_to_resume_device_file>" ]; then
# trim quotes
dev="$(printf '%s' "$dev" | sed -re 's/^"(.*)"\s*$/\1/' -e "s/^'(.*)'\\s*$/\\1/")"
_print_devno "$(printf '%b' "$dev")" # unmangle
fi
done
# regular swsusp
dev="$(sed -nr 's,^(.*\s)?resume=(\S+)(\s.*)?$,\2,p' /proc/cmdline)"
_print_devno "$(printf '%b' "$dev")" # unmangle
# initramfs-tools >=0.129
dev="${RESUME:-auto}"
if [ "$dev" != none ]; then
if [ "$dev" = auto ]; then
# next line from /usr/share/initramfs-tools/hooks/resume
dev="$(grep ^/dev/ /proc/swaps | sort -rnk3 | head -n 1 | cut -d " " -f 1)"
fi
_print_devno "$(printf '%b' "$dev")" # unmangle
fi
}
_print_devno() {
local DEV MAJ MIN # locally scope the 3 variables _resolve_device() sets
if [ -n "$1" ] && _resolve_device "$1"; then
printf '%d:%d\n' "$MAJ" "$MIN"
fi
}
# crypttab_print_initramfs_entry()
# Print a crypttab(5) entry - unless it was already processed - if it
# has the 'initramfs' option set.
crypttab_print_initramfs_entry() {
local usage=
if ! grep -Fxqz -e "$CRYPTTAB_NAME" -- "$DESTDIR/cryptroot/targets" &&
crypttab_parse_options --quiet &&
[ "${CRYPTTAB_OPTION_initramfs-no}" = "yes" ]; then
printf '%s\0' "$CRYPTTAB_NAME" >>"$DESTDIR/cryptroot/targets"
crypttab_print_entry
fi
}
# generate_initrd_crypttab()
# Generate the crypttab(5) snippet that is relevant at initramfs
# stage. (Devices that aren't required at initramfs stage are
# ignored.)
generate_initrd_crypttab() {
local devnos usage IFS="$(printf '\t\n ')"
mkdir -- "$DESTDIR/cryptroot"
true >"$DESTDIR/cryptroot/targets"
{
if devnos="$(get_mnt_devno /)"; then
if [ -n "$devnos" ]; then
usage=rootfs foreach_cryptdev crypttab_find_and_print_entry $devnos
fi
else
cryptsetup_message "WARNING: Couldn't determine root device"
fi
if devnos="$(get_resume_devno)" && [ -n "$devnos" ]; then
usage=resume foreach_cryptdev crypttab_find_and_print_entry $devnos
fi
if devnos="$(get_mnt_devno /usr)" && [ -n "$devnos" ]; then
usage="" foreach_cryptdev crypttab_find_and_print_entry $devnos
fi
# add crypttab entries with the 'initramfs' option set
crypttab_foreach_entry crypttab_print_initramfs_entry
} 3>"$DESTDIR/cryptroot/crypttab"
rm -f "$DESTDIR/cryptroot/targets"
}
# populate_CRYPTO_HASHES()
# Find out which crypto hashes are required for a crypttab(5) entry,
# and append them to the CRYPTO_HASHES variable.
populate_CRYPTO_HASHES() {
local hash source newline="
"
if crypttab_parse_options --quiet && [ -n "${CRYPTTAB_OPTION_header+x}" ]; then
source="$CRYPTTAB_OPTION_header"
else
source="$(_resolve_device_spec "$CRYPTTAB_SOURCE")" || source=""
fi
if [ ! -e "$source" ]; then
# missing source device or detached header, can't determine hashing function(s)
hash="@@UNKNOWN@@"
elif [ "$CRYPTTAB_TYPE" = "luks" ]; then
# using --dump-json-metadata would be more robust for LUKS2 but
# we also have to support LUKS1 hence have to parse luksDump output
hash="$(/sbin/cryptsetup luksDump -- "$source" | sed -nr 's/^\s*(AF hash|Hash|Hash spec)\s*:\s*//Ip')"
elif [ "$CRYPTTAB_TYPE" = "plain" ]; then
# --hash is being ignored when opening via key file
if [ "$CRYPTTAB_KEY" = "none" ] && [ -z "${CRYPTTAB_OPTION_keyscript+x}" ]; then
hash="${CRYPTTAB_OPTION_hash-sha256}" # default password hashing as of cryptsetup 2.7
fi
else
hash="" # or hash="@@UNKNOWN@@"?
fi
if [ -n "$hash" ]; then
CRYPTO_HASHES="${CRYPTO_HASHES:+$CRYPTO_HASHES$newline}$hash"
fi
}
# populate_CRYPTO_MODULES()
# Find out which crypto modules are required for a crypttab(5) entry,
# and append them to the CRYPTO_MODULES variable.
populate_CRYPTO_MODULES() {
local cipher iv
# cf. dmsetup(8) and https://gitlab.com/cryptsetup/cryptsetup/wikis/DMCrypt
cipher="$(dmsetup table --target crypt -- "$CRYPTTAB_NAME" | cut -d' ' -f4)"
if [ -z "$cipher" ]; then
cryptsetup_message "WARNING: Couldn't determine cipher modules to load for $CRYPTTAB_NAME"
elif [ "${cipher#capi:}" = "$cipher" ]; then
# direct specification "cipher[:keycount]-chainmode-ivmode[:ivopts]"
CRYPTO_MODULES="${CRYPTO_MODULES:+$CRYPTO_MODULES }${cipher%%[-:]*}" # cipher
cipher="${cipher#"${cipher%%-*}-"}" # chainmode-ivmode[:ivopts]"
CRYPTO_MODULES="${CRYPTO_MODULES:+$CRYPTO_MODULES }${cipher%-*}" # chainmode
iv="${cipher##*-}" # ivmode[:ivopts]"
CRYPTO_MODULES="${CRYPTO_MODULES:+$CRYPTO_MODULES }${iv%%:*}" # ivmode
if [ "${iv#*:}" != "$iv" ]; then
CRYPTO_MODULES="${CRYPTO_MODULES:+$CRYPTO_MODULES }${iv#*:}" # ivopts
fi
else
# kernel crypto API format "capi:cipher_api_spec-ivmode[:ivopts]", since linux 4.12
cipher="${cipher#capi:}"
cryptsetup_message "WARNING: Couldn't determine cipher modules to load for $CRYPTTAB_NAME" \
"(kernel crypto API format isn't supported yet)"
fi
}
# add_modules($glob, $moduledir, [$moduledir ..])
# Add modules matching under the given $moduledir(s), the name of
# which matching $glob.
# Return 0 if any module was found found, 1 if not.
add_modules() {
local glob="$1" found=n
shift
for mod in $(find -H "$@" -name "$glob.ko*" -type f -printf '%f\n'); do
manual_add_modules "${mod%%.*}"
found=y
done
[ "$found" = y ] && return 0 || return 1
}
# add_crypto_modules($name, [$name ..])
# Determine kernel module name and add to initramfs.
add_crypto_modules() {
local mod
for mod in "$@"; do
# We have several potential sources of modules (in order of preference):
#
# a) /lib/modules/$VERSION/kernel/arch/$ARCH/crypto/$mod-$specific.ko
# b) /lib/modules/$VERSION/kernel/crypto/$mod_generic.ko
# c) /lib/modules/$VERSION/kernel/crypto/$mod.ko
#
# and (currently ignored):
#
# d) /lib/modules/$VERSION/kernel/drivers/crypto/$specific-$mod.ko
add_modules "$mod-*" "$MODULESDIR"/kernel/arch/*/crypto || true
add_modules "${mod}_generic" "$MODULESDIR/kernel/crypto" \
|| add_modules "$mod" "$MODULESDIR/kernel/crypto" \
|| true
done
}
# copy_libssl_legacy_library()
# Copy ossl-modules/legacy.so (from libssl library) to initramfs if needed.
# OpenSSL 3.0 moved support for some crypto hashes into legacy.so.
# See https://launchpad.net/bugs/1979159
copy_libssl_legacy_library() {
local libcryptodir CRYPTO_HASHES=""
libcryptodir="$(env --unset=LD_PRELOAD ldd /sbin/cryptsetup | sed -nr '/.*=>\s*(\S+)\/libcrypto\.so\..*/ {s//\1/p;q}')"
[ -d "$libcryptodir" ] || return
crypttab_foreach_entry populate_CRYPTO_HASHES
# See https://www.openssl.org/docs/man3.0/man7/OSSL_PROVIDER-legacy.html#Hashing-Algorithms-Message-Digests
if printf '%s\n' "$CRYPTO_HASHES" | grep -Fxq -e @@UNKNOWN@@ -e ripemd160 -e whirlpool; then
# legacy hashes are used so legacy.so needs to be copied to the initramfs
# (assume ossl-modules/legacy.so is relative to the linked libcrypto.so)
copy_exec "$libcryptodir/ossl-modules/legacy.so" || true
fi
}
# See #1032221: newer libargon2 are built with glibc ≥2.34 hence no
# longer links libpthread. This in turns means that initramfs-tool's
# copy_exec() is no longer able to detect pthread_*() need and thus
# doesn't copy libgcc_s.so anymore. So we need to do it manually
# instead.
copy_libgcc_argon2() {
local libdir rv=0
libdir="$(env --unset=LD_PRELOAD ldd /sbin/cryptsetup | sed -nr '/.*=>\s*(\S+)\/libargon2\.so\..*/ {s//\1/p;q}')"
copy_libgcc "$libdir" || rv=$?
if [ $rv -ne 0 ]; then
# merged-/usr mismatch, see #1032518
if [ "${libdir#/usr/}" != "$libdir" ]; then
libdir="${libdir#/usr}"
else
libdir="/usr/${libdir#/}"
fi
copy_libgcc "$libdir" && rv=0 || rv=$?
fi
return $rv
}
#######################################################################
# Begin real processing
unset -v ASKPASS KEYFILE_PATTERN
ASKPASS="y"
KEYFILE_PATTERN=
# Load the hook config
if [ -f "/etc/cryptsetup-initramfs/conf-hook" ]; then
. /etc/cryptsetup-initramfs/conf-hook
fi
if [ -n "$KEYFILE_PATTERN" ]; then
case "${UMASK:-$(umask)}" in
0[0-7]77) ;;
*) cryptsetup_message "WARNING: Permissive UMASK (${UMASK:-$(umask)})." \
"Private key material within the initrd might be left unprotected."
;;
esac
fi
CRYPTO_MODULES=
if [ -r "$TABFILE" ]; then
generate_initrd_crypttab
TABFILE="$DESTDIR/cryptroot/crypttab"
crypttab_foreach_entry populate_CRYPTO_MODULES
copy_libssl_legacy_library
fi
# add required components
manual_add_modules dm_mod
manual_add_modules dm_crypt
copy_exec /sbin/cryptsetup
copy_exec /sbin/dmsetup
copy_libgcc_argon2
[ "$ASKPASS" = n ] || copy_exec /lib/cryptsetup/askpass
# We need sed. Either via busybox or as standalone binary.
if [ "$BUSYBOX" = n ] || [ -z "$BUSYBOXDIR" ]; then
copy_exec /bin/sed
fi
# detect whether the host CPU has AES-NI support
if grep -Eq '^flags\s*:(.*\s)?aes(\s.*)?$' /proc/cpuinfo; then
CRYPTO_MODULES="${CRYPTO_MODULES:+$CRYPTO_MODULES }aesni"
else
# workaround for #883595/#901884 (xts depends on ecb)
CRYPTO_MODULES="${CRYPTO_MODULES:+$CRYPTO_MODULES }ecb"
fi
# add userspace crypto module (only required for opening LUKS2 devices
# we add the module unconditionally as it's the default format)
CRYPTO_MODULES="${CRYPTO_MODULES:+$CRYPTO_MODULES }algif_skcipher"
if [ "$MODULES" = most ]; then
for d in "$MODULESDIR"/kernel/arch/*/crypto; do
copy_modules_dir "${d#"$MODULESDIR/"}"
done
copy_modules_dir "kernel/crypto"
else
if [ "$MODULES" != "dep" ]; then
# with large initramfs, we always add a basic subset of modules
add_crypto_modules aes cbc chainiv cryptomgr krng sha256 xts
fi
add_crypto_modules $(printf '%s' "${CRYPTO_MODULES-}" | tr ' ' '\n' | sort -u)
fi
copy_file library /lib/cryptsetup/functions /lib/cryptsetup/functions
Mini Shell