[general]
; The reaper thread will check every 5 seconds for exited clients, for config file changes, and for the CPU/iGPU power balance
reaper_freq=5
; The desired governor is used when entering GameMode instead of "performance"
desiredgov=performance
; The default governor is used when leaving GameMode instead of restoring the original value
;defaultgov=powersave
; The iGPU desired governor is used when the integrated GPU is under heavy load
igpu_desiredgov=powersave
; Threshold to use to decide when the integrated GPU is under heavy load.
; This is a ratio of iGPU Watts / CPU Watts which is used to determine when the
; integraged GPU is under heavy enough load to justify switching to
; igpu_desiredgov. Set this to -1 to disable all iGPU checking and always
; use desiredgov for games.
igpu_power_threshold=0.3
; GameMode can change the scheduler policy to SCHED_ISO on kernels which support it (currently
; not supported by upstream kernels). Can be set to "auto", "on" or "off". "auto" will enable
; with 4 or more CPU cores. "on" will always enable. Defaults to "off".
softrealtime=off
; GameMode can renice game processes. You can put any value between 0 and 20 here, the value
; will be negated and applied as a nice value (0 means no change). Defaults to 0.
; To use this feature, the user must be added to the gamemode group (and then rebooted):
; sudo usermod -aG gamemode $(whoami)
renice=0
; By default, GameMode adjusts the iopriority of clients to BE/0, you can put any value
; between 0 and 7 here (with 0 being highest priority), or one of the special values
; "off" (to disable) or "reset" (to restore Linux default behavior based on CPU priority),
; currently, only the best-effort class is supported thus you cannot set it here
ioprio=0
; Sets whether gamemode will inhibit the screensaver when active
; Defaults to 1
inhibit_screensaver=1
; Sets whether gamemode will disable split lock mitigation when active
; Defaults to 1
disable_splitlock=1
[filter]
; If "whitelist" entry has a value(s)
; gamemode will reject anything not in the whitelist
;whitelist=RiseOfTheTombRaider
; Gamemode will always reject anything in the blacklist
;blacklist=HalfLife3
; glxgears
[gpu]
; Here Be Dragons!
; Warning: Use these settings at your own risk
; Any damage to hardware incurred due to this feature is your responsibility and yours alone
; It is also highly recommended you try these settings out first manually to find the sweet spots
; Setting this to the keyphrase "accept-responsibility" will allow gamemode to apply GPU optimisations such as overclocks
;apply_gpu_optimisations=0
; The DRM device number on the system (usually 0), ie. the number in /sys/class/drm/card0/
;gpu_device=0
; Nvidia specific settings
; Requires the coolbits extension activated in nvidia-xconfig
; This corresponds to the desired GPUPowerMizerMode
; "Adaptive"=0 "Prefer Maximum Performance"=1 and "Auto"=2
; See NV_CTRL_GPU_POWER_MIZER_MODE and friends in https://github.com/NVIDIA/nvidia-settings/blob/master/src/libXNVCtrl/NVCtrl.h
;nv_powermizer_mode=1
; These will modify the core and mem clocks of the highest perf state in the Nvidia PowerMizer
; They are measured as Mhz offsets from the baseline, 0 will reset values to default, -1 or unset will not modify values
;nv_core_clock_mhz_offset=0
;nv_mem_clock_mhz_offset=0
; AMD specific settings
; Requires a relatively up to date AMDGPU kernel module
; See: https://dri.freedesktop.org/docs/drm/gpu/amdgpu.html#gpu-power-thermal-controls-and-monitoring
; It is also highly recommended you use lm-sensors (or other available tools) to verify card temperatures
; This corresponds to power_dpm_force_performance_level, "manual" is not supported for now
;amd_performance_level=high
[cpu]
; Parking or Pinning can be enabled with either "yes", "true" or "1" and disabled with "no", "false" or "0".
; Either can also be set to a specific list of cores to park or pin, comma separated list where "-" denotes
; a range. E.g "park_cores=1,8-15" would park cores 1 and 8 to 15.
; The default is uncommented is to disable parking but enable pinning. If either is enabled the code will
; currently only properly autodetect Ryzen 7900x3d, 7950x3d and Intel CPU:s with E- and P-cores.
;park_cores=no
;pin_cores=yes
[supervisor]
; This section controls the new gamemode functions gamemode_request_start_for and gamemode_request_end_for
; The whilelist and blacklist control which supervisor programs are allowed to make the above requests
;supervisor_whitelist=
;supervisor_blacklist=
; In case you want to allow a supervisor to take full control of gamemode, this option can be set
; This will only allow gamemode clients to be registered by using the above functions by a supervisor client
;require_supervisor=0
[custom]
; Custom scripts (executed using the shell) when gamemode starts and ends
;start=notify-send "GameMode started"
; /home/me/bin/stop_foldingathome.sh
;end=notify-send "GameMode ended"
; /home/me/bin/start_foldingathome.sh
; Timeout for scripts (seconds). Scripts will be killed if they do not complete within this time.
;script_timeout=10
Mini Shell