Current File : //usr/lib/modules/6.8.0-45-generic/build/include/linux/jiffies.h
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_JIFFIES_H
#define _LINUX_JIFFIES_H
#include <linux/cache.h>
#include <linux/limits.h>
#include <linux/math64.h>
#include <linux/minmax.h>
#include <linux/types.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <vdso/jiffies.h>
#include <asm/param.h> /* for HZ */
#include <generated/timeconst.h>
/*
* The following defines establish the engineering parameters of the PLL
* model. The HZ variable establishes the timer interrupt frequency, 100 Hz
* for the SunOS kernel, 256 Hz for the Ultrix kernel and 1024 Hz for the
* OSF/1 kernel. The SHIFT_HZ define expresses the same value as the
* nearest power of two in order to avoid hardware multiply operations.
*/
#if HZ >= 12 && HZ < 24
# define SHIFT_HZ 4
#elif HZ >= 24 && HZ < 48
# define SHIFT_HZ 5
#elif HZ >= 48 && HZ < 96
# define SHIFT_HZ 6
#elif HZ >= 96 && HZ < 192
# define SHIFT_HZ 7
#elif HZ >= 192 && HZ < 384
# define SHIFT_HZ 8
#elif HZ >= 384 && HZ < 768
# define SHIFT_HZ 9
#elif HZ >= 768 && HZ < 1536
# define SHIFT_HZ 10
#elif HZ >= 1536 && HZ < 3072
# define SHIFT_HZ 11
#elif HZ >= 3072 && HZ < 6144
# define SHIFT_HZ 12
#elif HZ >= 6144 && HZ < 12288
# define SHIFT_HZ 13
#else
# error Invalid value of HZ.
#endif
/* Suppose we want to divide two numbers NOM and DEN: NOM/DEN, then we can
* improve accuracy by shifting LSH bits, hence calculating:
* (NOM << LSH) / DEN
* This however means trouble for large NOM, because (NOM << LSH) may no
* longer fit in 32 bits. The following way of calculating this gives us
* some slack, under the following conditions:
* - (NOM / DEN) fits in (32 - LSH) bits.
* - (NOM % DEN) fits in (32 - LSH) bits.
*/
#define SH_DIV(NOM,DEN,LSH) ( (((NOM) / (DEN)) << (LSH)) \
+ ((((NOM) % (DEN)) << (LSH)) + (DEN) / 2) / (DEN))
/* LATCH is used in the interval timer and ftape setup. */
#define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */
extern int register_refined_jiffies(long clock_tick_rate);
/* TICK_USEC is the time between ticks in usec assuming SHIFTED_HZ */
#define TICK_USEC ((USEC_PER_SEC + HZ/2) / HZ)
/* USER_TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
#define USER_TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
#ifndef __jiffy_arch_data
#define __jiffy_arch_data
#endif
/*
* The 64-bit value is not atomic on 32-bit systems - you MUST NOT read it
* without sampling the sequence number in jiffies_lock.
* get_jiffies_64() will do this for you as appropriate.
*
* jiffies and jiffies_64 are at the same address for little-endian systems
* and for 64-bit big-endian systems.
* On 32-bit big-endian systems, jiffies is the lower 32 bits of jiffies_64
* (i.e., at address @jiffies_64 + 4).
* See arch/ARCH/kernel/vmlinux.lds.S
*/
extern u64 __cacheline_aligned_in_smp jiffies_64;
extern unsigned long volatile __cacheline_aligned_in_smp __jiffy_arch_data jiffies;
#if (BITS_PER_LONG < 64)
u64 get_jiffies_64(void);
#else
/**
* get_jiffies_64 - read the 64-bit non-atomic jiffies_64 value
*
* When BITS_PER_LONG < 64, this uses sequence number sampling using
* jiffies_lock to protect the 64-bit read.
*
* Return: current 64-bit jiffies value
*/
static inline u64 get_jiffies_64(void)
{
return (u64)jiffies;
}
#endif
/*
* These inlines deal with timer wrapping correctly. You are
* strongly encouraged to use them:
* 1. Because people otherwise forget
* 2. Because if the timer wrap changes in future you won't have to
* alter your driver code.
*/
/**
* time_after - returns true if the time a is after time b.
* @a: first comparable as unsigned long
* @b: second comparable as unsigned long
*
* Do this with "<0" and ">=0" to only test the sign of the result. A
* good compiler would generate better code (and a really good compiler
* wouldn't care). Gcc is currently neither.
*
* Return: %true is time a is after time b, otherwise %false.
*/
#define time_after(a,b) \
(typecheck(unsigned long, a) && \
typecheck(unsigned long, b) && \
((long)((b) - (a)) < 0))
/**
* time_before - returns true if the time a is before time b.
* @a: first comparable as unsigned long
* @b: second comparable as unsigned long
*
* Return: %true is time a is before time b, otherwise %false.
*/
#define time_before(a,b) time_after(b,a)
/**
* time_after_eq - returns true if the time a is after or the same as time b.
* @a: first comparable as unsigned long
* @b: second comparable as unsigned long
*
* Return: %true is time a is after or the same as time b, otherwise %false.
*/
#define time_after_eq(a,b) \
(typecheck(unsigned long, a) && \
typecheck(unsigned long, b) && \
((long)((a) - (b)) >= 0))
/**
* time_before_eq - returns true if the time a is before or the same as time b.
* @a: first comparable as unsigned long
* @b: second comparable as unsigned long
*
* Return: %true is time a is before or the same as time b, otherwise %false.
*/
#define time_before_eq(a,b) time_after_eq(b,a)
/**
* time_in_range - Calculate whether a is in the range of [b, c].
* @a: time to test
* @b: beginning of the range
* @c: end of the range
*
* Return: %true is time a is in the range [b, c], otherwise %false.
*/
#define time_in_range(a,b,c) \
(time_after_eq(a,b) && \
time_before_eq(a,c))
/**
* time_in_range_open - Calculate whether a is in the range of [b, c).
* @a: time to test
* @b: beginning of the range
* @c: end of the range
*
* Return: %true is time a is in the range [b, c), otherwise %false.
*/
#define time_in_range_open(a,b,c) \
(time_after_eq(a,b) && \
time_before(a,c))
/* Same as above, but does so with platform independent 64bit types.
* These must be used when utilizing jiffies_64 (i.e. return value of
* get_jiffies_64()). */
/**
* time_after64 - returns true if the time a is after time b.
* @a: first comparable as __u64
* @b: second comparable as __u64
*
* This must be used when utilizing jiffies_64 (i.e. return value of
* get_jiffies_64()).
*
* Return: %true is time a is after time b, otherwise %false.
*/
#define time_after64(a,b) \
(typecheck(__u64, a) && \
typecheck(__u64, b) && \
((__s64)((b) - (a)) < 0))
/**
* time_before64 - returns true if the time a is before time b.
* @a: first comparable as __u64
* @b: second comparable as __u64
*
* This must be used when utilizing jiffies_64 (i.e. return value of
* get_jiffies_64()).
*
* Return: %true is time a is before time b, otherwise %false.
*/
#define time_before64(a,b) time_after64(b,a)
/**
* time_after_eq64 - returns true if the time a is after or the same as time b.
* @a: first comparable as __u64
* @b: second comparable as __u64
*
* This must be used when utilizing jiffies_64 (i.e. return value of
* get_jiffies_64()).
*
* Return: %true is time a is after or the same as time b, otherwise %false.
*/
#define time_after_eq64(a,b) \
(typecheck(__u64, a) && \
typecheck(__u64, b) && \
((__s64)((a) - (b)) >= 0))
/**
* time_before_eq64 - returns true if the time a is before or the same as time b.
* @a: first comparable as __u64
* @b: second comparable as __u64
*
* This must be used when utilizing jiffies_64 (i.e. return value of
* get_jiffies_64()).
*
* Return: %true is time a is before or the same as time b, otherwise %false.
*/
#define time_before_eq64(a,b) time_after_eq64(b,a)
/**
* time_in_range64 - Calculate whether a is in the range of [b, c].
* @a: time to test
* @b: beginning of the range
* @c: end of the range
*
* Return: %true is time a is in the range [b, c], otherwise %false.
*/
#define time_in_range64(a, b, c) \
(time_after_eq64(a, b) && \
time_before_eq64(a, c))
/*
* These eight macros compare jiffies[_64] and 'a' for convenience.
*/
/**
* time_is_before_jiffies - return true if a is before jiffies
* @a: time (unsigned long) to compare to jiffies
*
* Return: %true is time a is before jiffies, otherwise %false.
*/
#define time_is_before_jiffies(a) time_after(jiffies, a)
/**
* time_is_before_jiffies64 - return true if a is before jiffies_64
* @a: time (__u64) to compare to jiffies_64
*
* Return: %true is time a is before jiffies_64, otherwise %false.
*/
#define time_is_before_jiffies64(a) time_after64(get_jiffies_64(), a)
/**
* time_is_after_jiffies - return true if a is after jiffies
* @a: time (unsigned long) to compare to jiffies
*
* Return: %true is time a is after jiffies, otherwise %false.
*/
#define time_is_after_jiffies(a) time_before(jiffies, a)
/**
* time_is_after_jiffies64 - return true if a is after jiffies_64
* @a: time (__u64) to compare to jiffies_64
*
* Return: %true is time a is after jiffies_64, otherwise %false.
*/
#define time_is_after_jiffies64(a) time_before64(get_jiffies_64(), a)
/**
* time_is_before_eq_jiffies - return true if a is before or equal to jiffies
* @a: time (unsigned long) to compare to jiffies
*
* Return: %true is time a is before or the same as jiffies, otherwise %false.
*/
#define time_is_before_eq_jiffies(a) time_after_eq(jiffies, a)
/**
* time_is_before_eq_jiffies64 - return true if a is before or equal to jiffies_64
* @a: time (__u64) to compare to jiffies_64
*
* Return: %true is time a is before or the same jiffies_64, otherwise %false.
*/
#define time_is_before_eq_jiffies64(a) time_after_eq64(get_jiffies_64(), a)
/**
* time_is_after_eq_jiffies - return true if a is after or equal to jiffies
* @a: time (unsigned long) to compare to jiffies
*
* Return: %true is time a is after or the same as jiffies, otherwise %false.
*/
#define time_is_after_eq_jiffies(a) time_before_eq(jiffies, a)
/**
* time_is_after_eq_jiffies64 - return true if a is after or equal to jiffies_64
* @a: time (__u64) to compare to jiffies_64
*
* Return: %true is time a is after or the same as jiffies_64, otherwise %false.
*/
#define time_is_after_eq_jiffies64(a) time_before_eq64(get_jiffies_64(), a)
/*
* Have the 32-bit jiffies value wrap 5 minutes after boot
* so jiffies wrap bugs show up earlier.
*/
#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
/*
* Change timeval to jiffies, trying to avoid the
* most obvious overflows..
*
* And some not so obvious.
*
* Note that we don't want to return LONG_MAX, because
* for various timeout reasons we often end up having
* to wait "jiffies+1" in order to guarantee that we wait
* at _least_ "jiffies" - so "jiffies+1" had better still
* be positive.
*/
#define MAX_JIFFY_OFFSET ((LONG_MAX >> 1)-1)
extern unsigned long preset_lpj;
/*
* We want to do realistic conversions of time so we need to use the same
* values the update wall clock code uses as the jiffies size. This value
* is: TICK_NSEC (which is defined in timex.h). This
* is a constant and is in nanoseconds. We will use scaled math
* with a set of scales defined here as SEC_JIFFIE_SC, USEC_JIFFIE_SC and
* NSEC_JIFFIE_SC. Note that these defines contain nothing but
* constants and so are computed at compile time. SHIFT_HZ (computed in
* timex.h) adjusts the scaling for different HZ values.
* Scaled math??? What is that?
*
* Scaled math is a way to do integer math on values that would,
* otherwise, either overflow, underflow, or cause undesired div
* instructions to appear in the execution path. In short, we "scale"
* up the operands so they take more bits (more precision, less
* underflow), do the desired operation and then "scale" the result back
* by the same amount. If we do the scaling by shifting we avoid the
* costly mpy and the dastardly div instructions.
* Suppose, for example, we want to convert from seconds to jiffies
* where jiffies is defined in nanoseconds as NSEC_PER_JIFFIE. The
* simple math is: jiff = (sec * NSEC_PER_SEC) / NSEC_PER_JIFFIE; We
* observe that (NSEC_PER_SEC / NSEC_PER_JIFFIE) is a constant which we
* might calculate at compile time, however, the result will only have
* about 3-4 bits of precision (less for smaller values of HZ).
*
* So, we scale as follows:
* jiff = (sec) * (NSEC_PER_SEC / NSEC_PER_JIFFIE);
* jiff = ((sec) * ((NSEC_PER_SEC * SCALE)/ NSEC_PER_JIFFIE)) / SCALE;
* Then we make SCALE a power of two so:
* jiff = ((sec) * ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE)) >> SCALE;
* Now we define:
* #define SEC_CONV = ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE))
* jiff = (sec * SEC_CONV) >> SCALE;
*
* Often the math we use will expand beyond 32-bits so we tell C how to
* do this and pass the 64-bit result of the mpy through the ">> SCALE"
* which should take the result back to 32-bits. We want this expansion
* to capture as much precision as possible. At the same time we don't
* want to overflow so we pick the SCALE to avoid this. In this file,
* that means using a different scale for each range of HZ values (as
* defined in timex.h).
*
* For those who want to know, gcc will give a 64-bit result from a "*"
* operator if the result is a long long AND at least one of the
* operands is cast to long long (usually just prior to the "*" so as
* not to confuse it into thinking it really has a 64-bit operand,
* which, buy the way, it can do, but it takes more code and at least 2
* mpys).
* We also need to be aware that one second in nanoseconds is only a
* couple of bits away from overflowing a 32-bit word, so we MUST use
* 64-bits to get the full range time in nanoseconds.
*/
/*
* Here are the scales we will use. One for seconds, nanoseconds and
* microseconds.
*
* Within the limits of cpp we do a rough cut at the SEC_JIFFIE_SC and
* check if the sign bit is set. If not, we bump the shift count by 1.
* (Gets an extra bit of precision where we can use it.)
* We know it is set for HZ = 1024 and HZ = 100 not for 1000.
* Haven't tested others.
* Limits of cpp (for #if expressions) only long (no long long), but
* then we only need the most signicant bit.
*/
#define SEC_JIFFIE_SC (31 - SHIFT_HZ)
#if !((((NSEC_PER_SEC << 2) / TICK_NSEC) << (SEC_JIFFIE_SC - 2)) & 0x80000000)
#undef SEC_JIFFIE_SC
#define SEC_JIFFIE_SC (32 - SHIFT_HZ)
#endif
#define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29)
#define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC) +\
TICK_NSEC -1) / (u64)TICK_NSEC))
#define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
TICK_NSEC -1) / (u64)TICK_NSEC))
/*
* The maximum jiffie value is (MAX_INT >> 1). Here we translate that
* into seconds. The 64-bit case will overflow if we are not careful,
* so use the messy SH_DIV macro to do it. Still all constants.
*/
#if BITS_PER_LONG < 64
# define MAX_SEC_IN_JIFFIES \
(long)((u64)((u64)MAX_JIFFY_OFFSET * TICK_NSEC) / NSEC_PER_SEC)
#else /* take care of overflow on 64-bit machines */
# define MAX_SEC_IN_JIFFIES \
(SH_DIV((MAX_JIFFY_OFFSET >> SEC_JIFFIE_SC) * TICK_NSEC, NSEC_PER_SEC, 1) - 1)
#endif
/*
* Convert various time units to each other:
*/
extern unsigned int jiffies_to_msecs(const unsigned long j);
extern unsigned int jiffies_to_usecs(const unsigned long j);
/**
* jiffies_to_nsecs - Convert jiffies to nanoseconds
* @j: jiffies value
*
* Return: nanoseconds value
*/
static inline u64 jiffies_to_nsecs(const unsigned long j)
{
return (u64)jiffies_to_usecs(j) * NSEC_PER_USEC;
}
extern u64 jiffies64_to_nsecs(u64 j);
extern u64 jiffies64_to_msecs(u64 j);
extern unsigned long __msecs_to_jiffies(const unsigned int m);
#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
/*
* HZ is equal to or smaller than 1000, and 1000 is a nice round
* multiple of HZ, divide with the factor between them, but round
* upwards:
*/
static inline unsigned long _msecs_to_jiffies(const unsigned int m)
{
return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ);
}
#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
/*
* HZ is larger than 1000, and HZ is a nice round multiple of 1000 -
* simply multiply with the factor between them.
*
* But first make sure the multiplication result cannot overflow:
*/
static inline unsigned long _msecs_to_jiffies(const unsigned int m)
{
if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
return MAX_JIFFY_OFFSET;
return m * (HZ / MSEC_PER_SEC);
}
#else
/*
* Generic case - multiply, round and divide. But first check that if
* we are doing a net multiplication, that we wouldn't overflow:
*/
static inline unsigned long _msecs_to_jiffies(const unsigned int m)
{
if (HZ > MSEC_PER_SEC && m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
return MAX_JIFFY_OFFSET;
return (MSEC_TO_HZ_MUL32 * m + MSEC_TO_HZ_ADJ32) >> MSEC_TO_HZ_SHR32;
}
#endif
/**
* msecs_to_jiffies: - convert milliseconds to jiffies
* @m: time in milliseconds
*
* conversion is done as follows:
*
* - negative values mean 'infinite timeout' (MAX_JIFFY_OFFSET)
*
* - 'too large' values [that would result in larger than
* MAX_JIFFY_OFFSET values] mean 'infinite timeout' too.
*
* - all other values are converted to jiffies by either multiplying
* the input value by a factor or dividing it with a factor and
* handling any 32-bit overflows.
* for the details see __msecs_to_jiffies()
*
* msecs_to_jiffies() checks for the passed in value being a constant
* via __builtin_constant_p() allowing gcc to eliminate most of the
* code. __msecs_to_jiffies() is called if the value passed does not
* allow constant folding and the actual conversion must be done at
* runtime.
* The HZ range specific helpers _msecs_to_jiffies() are called both
* directly here and from __msecs_to_jiffies() in the case where
* constant folding is not possible.
*
* Return: jiffies value
*/
static __always_inline unsigned long msecs_to_jiffies(const unsigned int m)
{
if (__builtin_constant_p(m)) {
if ((int)m < 0)
return MAX_JIFFY_OFFSET;
return _msecs_to_jiffies(m);
} else {
return __msecs_to_jiffies(m);
}
}
extern unsigned long __usecs_to_jiffies(const unsigned int u);
#if !(USEC_PER_SEC % HZ)
static inline unsigned long _usecs_to_jiffies(const unsigned int u)
{
return (u + (USEC_PER_SEC / HZ) - 1) / (USEC_PER_SEC / HZ);
}
#else
static inline unsigned long _usecs_to_jiffies(const unsigned int u)
{
return (USEC_TO_HZ_MUL32 * u + USEC_TO_HZ_ADJ32)
>> USEC_TO_HZ_SHR32;
}
#endif
/**
* usecs_to_jiffies: - convert microseconds to jiffies
* @u: time in microseconds
*
* conversion is done as follows:
*
* - 'too large' values [that would result in larger than
* MAX_JIFFY_OFFSET values] mean 'infinite timeout' too.
*
* - all other values are converted to jiffies by either multiplying
* the input value by a factor or dividing it with a factor and
* handling any 32-bit overflows as for msecs_to_jiffies.
*
* usecs_to_jiffies() checks for the passed in value being a constant
* via __builtin_constant_p() allowing gcc to eliminate most of the
* code. __usecs_to_jiffies() is called if the value passed does not
* allow constant folding and the actual conversion must be done at
* runtime.
* The HZ range specific helpers _usecs_to_jiffies() are called both
* directly here and from __msecs_to_jiffies() in the case where
* constant folding is not possible.
*
* Return: jiffies value
*/
static __always_inline unsigned long usecs_to_jiffies(const unsigned int u)
{
if (__builtin_constant_p(u)) {
if (u > jiffies_to_usecs(MAX_JIFFY_OFFSET))
return MAX_JIFFY_OFFSET;
return _usecs_to_jiffies(u);
} else {
return __usecs_to_jiffies(u);
}
}
extern unsigned long timespec64_to_jiffies(const struct timespec64 *value);
extern void jiffies_to_timespec64(const unsigned long jiffies,
struct timespec64 *value);
extern clock_t jiffies_to_clock_t(unsigned long x);
static inline clock_t jiffies_delta_to_clock_t(long delta)
{
return jiffies_to_clock_t(max(0L, delta));
}
static inline unsigned int jiffies_delta_to_msecs(long delta)
{
return jiffies_to_msecs(max(0L, delta));
}
extern unsigned long clock_t_to_jiffies(unsigned long x);
extern u64 jiffies_64_to_clock_t(u64 x);
extern u64 nsec_to_clock_t(u64 x);
extern u64 nsecs_to_jiffies64(u64 n);
extern unsigned long nsecs_to_jiffies(u64 n);
#define TIMESTAMP_SIZE 30
#endif
Mini Shell