Current File : //usr/lib/apparmor/rc.apparmor.functions
#!/bin/sh
# ----------------------------------------------------------------------
# Copyright (c) 1999-2008 NOVELL (All rights reserved)
# Copyright (c) 2009-2018 Canonical Ltd. (All rights reserved)
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of version 2 of the GNU General Public
# License published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, contact Novell, Inc.
# ----------------------------------------------------------------------
# rc.apparmor.functions by Steve Beattie
#
# NOTE: rc.apparmor initscripts that source this file need to implement
# the following set of functions:
# aa_action
# aa_log_action_start
# aa_log_action_end
# aa_log_success_msg
# aa_log_warning_msg
# aa_log_failure_msg
# aa_log_skipped_msg
# aa_log_daemon_msg
# aa_log_end_msg
# Some nice defines that we use
PARSER=/sbin/apparmor_parser
PARSER_OPTS=--write-cache
# Suppress warnings when booting in quiet mode
if [ "${QUIET:-no}" = yes ] || [ "${quiet:-n}" = y ]; then
PARSER_OPTS="$PARSER_OPTS --quiet"
fi
if [ -d /etc/apparmor.d ] ; then
PROFILE_DIRS=/etc/apparmor.d
else
aa_log_warning_msg "Unable to find profiles directory, installation problem?"
fi
# Eg. snapd policy might need this on some systems if loading policy
# during early boot if not using the snapd unit file
ADDITIONAL_PROFILE_DIR=
if [ -n "$ADDITIONAL_PROFILE_DIR" ] && [ -d "$ADDITIONAL_PROFILE_DIR" ]; then
PROFILE_DIRS="$PROFILE_DIRS $ADDITIONAL_PROFILE_DIR"
fi
AA_STATUS=/usr/sbin/aa-status
SECURITYFS=/sys/kernel/security
SFS_MOUNTPOINT="${SECURITYFS}/apparmor"
# keep exit status from parser during profile load. 0 is good, 1 is bad
STATUS=0
# Test if the apparmor "module" is present.
is_apparmor_present() {
[ -d /sys/module/apparmor ]
}
# Checks to see if the current container is capable of having internal AppArmor
# profiles that should be loaded. Callers of this function should have already
# verified that they're running inside of a container environment with
# something like `systemd-detect-virt --container`.
#
# The only known container environments capable of supporting internal policy
# are LXD and LXC environments, and Windows Subsystem for Linux.
#
# Returns 0 if the container environment is capable of having its own internal
# policy and non-zero otherwise.
#
# IMPORTANT: This function will return 0 in the case of a non-LXD/non-LXC
# system container technology being nested inside of a LXD/LXC container that
# utilized an AppArmor namespace and profile stacking. The reason 0 will be
# returned is because .ns_stacked will be "yes" and .ns_name will still match
# "lx[dc]-*" since the nested system container technology will not have set up
# a new AppArmor profile namespace. This will result in the nested system
# container's boot process to experience failed policy loads but the boot
# process should continue without any loss of functionality. This is an
# unsupported configuration that cannot be properly handled by this function.
is_container_with_internal_policy() {
# this function is sometimes called independently of
# is_apparmor_loaded(), so also define this here.
local ns_stacked_path="${SFS_MOUNTPOINT}/.ns_stacked"
local ns_name_path="${SFS_MOUNTPOINT}/.ns_name"
local ns_stacked
local ns_name
# WSL needs to be detected explicitly
if [ -x /usr/bin/systemd-detect-virt ] && \
[ "$(systemd-detect-virt --container)" = "wsl" ]; then
return 0
fi
if ! [ -f "$ns_stacked_path" ] || ! [ -f "$ns_name_path" ]; then
return 1
fi
read -r ns_stacked < "$ns_stacked_path"
if [ "$ns_stacked" != "yes" ]; then
return 1
fi
# LXD, Incus and LXC set up AppArmor namespaces starting with "lxd-",
# "incus-" and "lxc-", respectively. Return non-zero for all other
# namespace identifiers.
read -r ns_name < "$ns_name_path"
if [ "${ns_name#lxd-*}" = "$ns_name" ] && \
[ "${ns_name#incus-*}" = "$ns_name" ] && \
[ "${ns_name#lxc-*}" = "$ns_name" ]; then
return 1
fi
return 0
}
__parse_profiles_dir() {
local parser_cmd="$1"
local profile_dir="$2"
local status=0
if [ ! -d "$profile_dir" ]; then
aa_log_failure_msg "Profile directory not found: $profile_dir"
return 1
fi
if [ -z "$(ls "$profile_dir"/)" ]; then
aa_log_failure_msg "No profiles found in $profile_dir"
return 1
fi
# shellcheck disable=SC2086
if ! "$PARSER" $PARSER_OPTS "$parser_cmd" -- "$profile_dir"; then
status=1
aa_log_failure_msg "At least one profile failed to load"
fi
return "$status"
}
check_userns() {
userns_restricted=$(sysctl -n kernel.apparmor_restrict_unprivileged_userns)
unconfined_userns=$([ -f /sys/kernel/security/apparmor/features/policy/unconfined_restrictions/userns ] && cat /sys/kernel/security/apparmor/features/policy/unconfined_restrictions/userns || echo 0)
if [ -n "$userns_restricted" ] && [ "$userns_restricted" -eq 1 ]; then
if [ "$unconfined_userns" -eq 0 ]; then
# userns restrictions rely on unconfined userns to be supported
aa_action "disabling unprivileged userns restrictions since unconfined userns is not supported / enabled" \
sysctl -w kernel.apparmor_restrict_unprivileged_userns=0
fi
fi
}
parse_profiles() {
check_userns
# get parser arg
case "$1" in
load)
PARSER_CMD="--add"
PARSER_MSG="Loading AppArmor profiles "
;;
reload)
PARSER_CMD="--replace"
PARSER_MSG="Reloading AppArmor profiles "
;;
*)
aa_log_failure_msg "required 'load' or 'reload'"
exit 1
;;
esac
aa_log_action_start "$PARSER_MSG"
# run the parser on all of the apparmor profiles
if [ ! -f "$PARSER" ]; then
aa_log_failure_msg "AppArmor parser not found"
exit 1
fi
for profile_dir in $PROFILE_DIRS; do
__parse_profiles_dir "$PARSER_CMD" "$profile_dir" || STATUS=$?
done
aa_log_action_end "$STATUS"
return "$STATUS"
}
is_apparmor_loaded() {
if ! is_securityfs_mounted ; then
mount_securityfs
fi
if [ -f "${SFS_MOUNTPOINT}/profiles" ]; then
return 0
fi
is_apparmor_present
return $?
}
is_securityfs_mounted() {
test -d "$SECURITYFS" -a -d /sys/fs/cgroup/systemd || grep -q securityfs /proc/filesystems && grep -q securityfs /proc/mounts
return $?
}
mount_securityfs() {
if grep -q securityfs /proc/filesystems ; then
aa_action "Mounting securityfs on $SECURITYFS" \
mount -t securityfs securityfs "$SECURITYFS"
return $?
fi
return 0
}
apparmor_start() {
aa_log_daemon_msg "Starting AppArmor"
if ! is_apparmor_present ; then
aa_log_failure_msg "Starting AppArmor - failed, To enable AppArmor, ensure your kernel is configured with CONFIG_SECURITY_APPARMOR=y then add 'security=apparmor apparmor=1' to the kernel command line"
aa_log_end_msg 1
return 1
elif ! is_apparmor_loaded ; then
aa_log_failure_msg "Starting AppArmor - AppArmor control files aren't available under /sys/kernel/security/, please make sure securityfs is mounted."
aa_log_end_msg 1
return 1
fi
if [ ! -w "$SFS_MOUNTPOINT/.load" ] ; then
aa_log_failure_msg "Loading AppArmor profiles - failed, Do you have the correct privileges?"
aa_log_end_msg 1
return 1
fi
# if there is anything in the profiles file don't load
if ! read -r _ < "$SFS_MOUNTPOINT/profiles"; then
parse_profiles load
else
aa_log_skipped_msg ": already loaded with profiles."
return 0
fi
aa_log_end_msg 0
return 0
}
remove_profiles() {
# removing profiles as we directly read from apparmorfs
# doesn't work, since we are removing entries which screws up
# our position. Lets hope there are never enough profiles to
# overflow the variable
if ! is_apparmor_loaded ; then
aa_log_failure_msg "AppArmor module is not loaded"
return 1
fi
if [ ! -w "$SFS_MOUNTPOINT/.remove" ] ; then
aa_log_failure_msg "Root privileges not available"
return 1
fi
if [ ! -x "$PARSER" ] ; then
aa_log_failure_msg "Unable to execute AppArmor parser"
return 1
fi
retval=0
# We filter child profiles as removing the parent will remove
# the children
sed -e "s/ (\(enforce\|complain\))$//" "$SFS_MOUNTPOINT/profiles" | \
LC_COLLATE=C sort | grep -v // | {
while read -r profile ; do
printf "%s" "$profile" > "$SFS_MOUNTPOINT/.remove"
rc=$?
if [ "$rc" -ne 0 ] ; then
retval=$rc
fi
done
return "$retval"
}
}
apparmor_stop() {
aa_log_daemon_msg "Unloading AppArmor profiles"
remove_profiles
rc=$?
aa_log_end_msg "$rc"
return "$rc"
}
apparmor_kill() {
if ! is_apparmor_loaded ; then
aa_log_failure_msg "AppArmor module is not loaded"
return 1
fi
aa_log_failure_msg "apparmor_kill() is no longer supported because AppArmor can't be built as a module"
return 1
}
__apparmor_restart() {
if [ ! -w "$SFS_MOUNTPOINT/.load" ] ; then
aa_log_failure_msg "Loading AppArmor profiles - failed, Do you have the correct privileges?"
return 4
fi
aa_log_daemon_msg "Restarting AppArmor"
parse_profiles reload
rc=$?
aa_log_end_msg "$rc"
return "$rc"
}
apparmor_restart() {
if ! is_apparmor_loaded ; then
apparmor_start
rc=$?
return "$rc"
fi
__apparmor_restart
return $?
}
apparmor_try_restart() {
if ! is_apparmor_loaded ; then
return 0
fi
__apparmor_restart
return $?
}
apparmor_status () {
if test -x "$AA_STATUS" ; then
"$AA_STATUS" --verbose
return $?
fi
if ! is_apparmor_loaded ; then
echo "AppArmor is not loaded."
rc=1
else
echo "AppArmor is enabled."
rc=0
fi
echo "Install the apparmor-utils package to receive more detailed"
echo "status information here (or examine $SFS_MOUNTPOINT directly)."
return "$rc"
}
Mini Shell