/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _SOUND_FIREWIRE_H_INCLUDED
#define _SOUND_FIREWIRE_H_INCLUDED
#include <linux/ioctl.h>
#include <linux/types.h>
/* events can be read() from the hwdep device */
#define SNDRV_FIREWIRE_EVENT_LOCK_STATUS 0x000010cc
#define SNDRV_FIREWIRE_EVENT_DICE_NOTIFICATION 0xd1ce004e
#define SNDRV_FIREWIRE_EVENT_EFW_RESPONSE 0x4e617475
#define SNDRV_FIREWIRE_EVENT_DIGI00X_MESSAGE 0x746e736c
#define SNDRV_FIREWIRE_EVENT_MOTU_NOTIFICATION 0x64776479
#define SNDRV_FIREWIRE_EVENT_TASCAM_CONTROL 0x7473636d
#define SNDRV_FIREWIRE_EVENT_MOTU_REGISTER_DSP_CHANGE 0x4d545244
#define SNDRV_FIREWIRE_EVENT_FF400_MESSAGE 0x4f6c6761
struct snd_firewire_event_common {
unsigned int type; /* SNDRV_FIREWIRE_EVENT_xxx */
};
struct snd_firewire_event_lock_status {
unsigned int type;
unsigned int status; /* 0/1 = unlocked/locked */
};
struct snd_firewire_event_dice_notification {
unsigned int type;
unsigned int notification; /* DICE-specific bits */
};
#define SND_EFW_TRANSACTION_USER_SEQNUM_MAX ((__u32)((__u16)~0) - 1)
/* each field should be in big endian */
struct snd_efw_transaction {
__be32 length;
__be32 version;
__be32 seqnum;
__be32 category;
__be32 command;
__be32 status;
__be32 params[];
};
struct snd_firewire_event_efw_response {
unsigned int type;
__be32 response[]; /* some responses */
};
struct snd_firewire_event_digi00x_message {
unsigned int type;
__u32 message; /* Digi00x-specific message */
};
struct snd_firewire_event_motu_notification {
unsigned int type;
__u32 message; /* MOTU-specific bits. */
};
struct snd_firewire_tascam_change {
unsigned int index;
__be32 before;
__be32 after;
};
struct snd_firewire_event_tascam_control {
unsigned int type;
struct snd_firewire_tascam_change changes[];
};
struct snd_firewire_event_motu_register_dsp_change {
unsigned int type;
__u32 count; /* The number of changes. */
__u32 changes[]; /* Encoded event for change of register DSP. */
};
/**
* struct snd_firewire_event_ff400_message - the container for message from Fireface 400 when
* operating hardware knob.
*
* @type: Fixed to SNDRV_FIREWIRE_EVENT_FF400_MESSAGE.
* @message_count: The number of messages.
* @messages.message: The messages expressing hardware knob operation.
* @messages.tstamp: The isochronous cycle at which the request subaction of asynchronous
* transaction was sent to deliver the message. It has 16 bit unsigned integer
* value. The higher 3 bits of value expresses the lower three bits of second
* field in the format of CYCLE_TIME, up to 7. The rest 13 bits expresses cycle
* field up to 7999.
*
* The structure expresses message transmitted by Fireface 400 when operating hardware knob.
*/
struct snd_firewire_event_ff400_message {
unsigned int type;
unsigned int message_count;
struct {
__u32 message;
__u32 tstamp;
} messages[];
};
union snd_firewire_event {
struct snd_firewire_event_common common;
struct snd_firewire_event_lock_status lock_status;
struct snd_firewire_event_dice_notification dice_notification;
struct snd_firewire_event_efw_response efw_response;
struct snd_firewire_event_digi00x_message digi00x_message;
struct snd_firewire_event_tascam_control tascam_control;
struct snd_firewire_event_motu_notification motu_notification;
struct snd_firewire_event_motu_register_dsp_change motu_register_dsp_change;
struct snd_firewire_event_ff400_message ff400_message;
};
#define SNDRV_FIREWIRE_IOCTL_GET_INFO _IOR('H', 0xf8, struct snd_firewire_get_info)
#define SNDRV_FIREWIRE_IOCTL_LOCK _IO('H', 0xf9)
#define SNDRV_FIREWIRE_IOCTL_UNLOCK _IO('H', 0xfa)
#define SNDRV_FIREWIRE_IOCTL_TASCAM_STATE _IOR('H', 0xfb, struct snd_firewire_tascam_state)
#define SNDRV_FIREWIRE_IOCTL_MOTU_REGISTER_DSP_METER _IOR('H', 0xfc, struct snd_firewire_motu_register_dsp_meter)
#define SNDRV_FIREWIRE_IOCTL_MOTU_COMMAND_DSP_METER _IOR('H', 0xfd, struct snd_firewire_motu_command_dsp_meter)
#define SNDRV_FIREWIRE_IOCTL_MOTU_REGISTER_DSP_PARAMETER _IOR('H', 0xfe, struct snd_firewire_motu_register_dsp_parameter)
#define SNDRV_FIREWIRE_TYPE_DICE 1
#define SNDRV_FIREWIRE_TYPE_FIREWORKS 2
#define SNDRV_FIREWIRE_TYPE_BEBOB 3
#define SNDRV_FIREWIRE_TYPE_OXFW 4
#define SNDRV_FIREWIRE_TYPE_DIGI00X 5
#define SNDRV_FIREWIRE_TYPE_TASCAM 6
#define SNDRV_FIREWIRE_TYPE_MOTU 7
#define SNDRV_FIREWIRE_TYPE_FIREFACE 8
struct snd_firewire_get_info {
unsigned int type; /* SNDRV_FIREWIRE_TYPE_xxx */
unsigned int card; /* same as fw_cdev_get_info.card */
unsigned char guid[8];
char device_name[16]; /* device node in /dev */
};
/*
* SNDRV_FIREWIRE_IOCTL_LOCK prevents the driver from streaming.
* Returns -EBUSY if the driver is already streaming.
*/
#define SNDRV_FIREWIRE_TASCAM_STATE_COUNT 64
struct snd_firewire_tascam_state {
__be32 data[SNDRV_FIREWIRE_TASCAM_STATE_COUNT];
};
/*
* In below MOTU models, software is allowed to control their DSP by accessing to registers.
* - 828mk2
* - 896hd
* - Traveler
* - 8 pre
* - Ultralite
* - 4 pre
* - Audio Express
*
* On the other hand, the status of DSP is split into specific messages included in the sequence of
* isochronous packet. ALSA firewire-motu driver gathers the messages and allow userspace applications
* to read it via ioctl. In 828mk2, 896hd, and Traveler, hardware meter for all of physical inputs
* are put into the message, while one pair of physical outputs is selected. The selection is done by
* LSB one byte in asynchronous write quadlet transaction to 0x'ffff'f000'0b2c.
*
* I note that V3HD/V4HD uses asynchronous transaction for the purpose. The destination address is
* registered to 0x'ffff'f000'0b38 and '0b3c by asynchronous write quadlet request. The size of
* message differs between 23 and 51 quadlets. For the case, the number of mixer bus can be extended
* up to 12.
*/
#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_INPUT_COUNT 24
#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_OUTPUT_COUNT 24
#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_COUNT \
(SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_INPUT_COUNT + SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_OUTPUT_COUNT)
/**
* struct snd_firewire_motu_register_dsp_meter - the container for meter information in DSP
* controlled by register access
* @data: Signal level meters. The mapping between position and input/output channel is
* model-dependent.
*
* The structure expresses the part of DSP status for hardware meter. The u8 storage includes linear
* value for audio signal level between 0x00 and 0x7f.
*/
struct snd_firewire_motu_register_dsp_meter {
__u8 data[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_COUNT];
};
#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_COUNT 4
#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT 20
#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_INPUT_COUNT 10
#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_ALIGNED_INPUT_COUNT (SNDRV_FIREWIRE_MOTU_REGISTER_DSP_INPUT_COUNT + 2)
/**
* snd_firewire_motu_register_dsp_parameter - the container for parameters of DSP controlled
* by register access.
* @mixer.source.gain: The gain of source to mixer.
* @mixer.source.pan: The L/R balance of source to mixer.
* @mixer.source.flag: The flag of source to mixer, including mute, solo.
* @mixer.source.paired_balance: The L/R balance of paired source to mixer, only for 4 pre and
* Audio Express.
* @mixer.source.paired_width: The width of paired source to mixer, only for 4 pre and
* Audio Express.
* @mixer.output.paired_volume: The volume of paired output from mixer.
* @mixer.output.paired_flag: The flag of paired output from mixer.
* @output.main_paired_volume: The volume of paired main output.
* @output.hp_paired_volume: The volume of paired hp output.
* @output.hp_paired_assignment: The source assigned to paired hp output.
* @output.reserved: Padding for 32 bit alignment for future extension.
* @line_input.boost_flag: The flags of boost for line inputs, only for 828mk2 and Traveler.
* @line_input.nominal_level_flag: The flags of nominal level for line inputs, only for 828mk2 and
* Traveler.
* @line_input.reserved: Padding for 32 bit alignment for future extension.
* @input.gain_and_invert: The value including gain and invert for input, only for Ultralite, 4 pre
* and Audio Express.
* @input.flag: The flag of input; e.g. jack detection, phantom power, and pad, only for Ultralite,
* 4 pre and Audio express.
* @reserved: Padding so that the size of structure is kept to 512 byte, but for future extension.
*
* The structure expresses the set of parameters for DSP controlled by register access.
*/
struct snd_firewire_motu_register_dsp_parameter {
struct {
struct {
__u8 gain[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT];
__u8 pan[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT];
__u8 flag[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT];
__u8 paired_balance[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT];
__u8 paired_width[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT];
} source[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_COUNT];
struct {
__u8 paired_volume[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_COUNT];
__u8 paired_flag[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_COUNT];
} output;
} mixer;
struct {
__u8 main_paired_volume;
__u8 hp_paired_volume;
__u8 hp_paired_assignment;
__u8 reserved[5];
} output;
struct {
__u8 boost_flag;
__u8 nominal_level_flag;
__u8 reserved[6];
} line_input;
struct {
__u8 gain_and_invert[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_ALIGNED_INPUT_COUNT];
__u8 flag[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_ALIGNED_INPUT_COUNT];
} input;
__u8 reserved[64];
};
/*
* In below MOTU models, software is allowed to control their DSP by command in frame of
* asynchronous transaction to 0x'ffff'0001'0000:
*
* - 828 mk3 (FireWire only and Hybrid)
* - 896 mk3 (FireWire only and Hybrid)
* - Ultralite mk3 (FireWire only and Hybrid)
* - Traveler mk3
* - Track 16
*
* On the other hand, the states of hardware meter is split into specific messages included in the
* sequence of isochronous packet. ALSA firewire-motu driver gathers the message and allow userspace
* application to read it via ioctl.
*/
#define SNDRV_FIREWIRE_MOTU_COMMAND_DSP_METER_COUNT 400
/**
* struct snd_firewire_motu_command_dsp_meter - the container for meter information in DSP
* controlled by command
* @data: Signal level meters. The mapping between position and signal channel is model-dependent.
*
* The structure expresses the part of DSP status for hardware meter. The 32 bit storage is
* estimated to include IEEE 764 32 bit single precision floating point (binary32) value. It is
* expected to be linear value (not logarithm) for audio signal level between 0.0 and +1.0.
*/
struct snd_firewire_motu_command_dsp_meter {
float data[SNDRV_FIREWIRE_MOTU_COMMAND_DSP_METER_COUNT];
};
#endif /* _SOUND_FIREWIRE_H_INCLUDED */
Mini Shell