Current File : //lib/x86_64-linux-gnu/perl5/5.38/Glib/devel.pod
=head1 NAME
Glib::devel - Binding developer's overview of Glib's internals
=head1 DESCRIPTION
Do you need to know how the gtk2-perl language bindings work, or need to write
your own language bindings for a Glib/Gtk2-based library? Then you've come to
the right place. If you are just a perl developer wanting to write programs
with Glib or Gtk2, then this is probably way over your head.
This document began its life as a post to gtk-perl-list about a redesign of the
fundamentals of the bindings; today it is the reference documentation for the
developers of the bindings.
To reduce confusion, refer to GLib, the C library, with a capital L, and Glib
the perl module with a lower-case l. While the Gtk2 module is the primary
client of Glib, it is not necessarily the only one; in fact, the perl bindings
for the GStreamer library build directly atop Glib. Therefore, this document
describes just the GLib/Glib basics. For details on how Gtk2 extends
upon the concepts presented here, see L<Gtk2::devel>.
In various places, we use the name GPerl to refer to the actual binding
subsystem.
In order to avoid getting very quickly out of date, this document doesn't go
into great detail on APIs. gperl.h is rather heavily commented, and should be
considered the canonical source of correct API information.
=head1 Basic Philosophy
GLib is a portability library for C programs, providing a common set of APIs
and services on various platforms. Along with that you get libgobject, which
provides an inheritance-based type system and other spiffy things.
Glib, as a perl module, must decide which portions of GLib's facilities to map
to perl and which to abstract and encapsulate.
In the grand scheme, the bindings have been designed with a few basic tenets in
mind:
=over
=item -
Stick close to the C API, to allow a perl developer to use knowledge from the C
API and API reference docs with the perl bindings; this is overruled in some
places by the remaining tenets.
=item -
Be perlish. This is the most important. The user of the perl bindings should
not have to worry about memory management, reference counting, freeing objects,
and all that stuff, else he might as well go write in C instead.
=item -
Leave out deprecated functionality.
=item -
Don't add new functionality. The exceptions to this rule are consolidation of
methods where default parameters may be used, or where the direct analog from C
is not practical.
=item -
Be lightweight. As little indirection and bloat as possible. If possible,
implement each toplevel module (e.g., Glib, Gtk2, Gnome2, GtkHTML, etc) as one
.pm and one .so.
=item -
Be extensible. Export header files and typemaps so that other modules can
easily chain off of our base. Do not require the entirely of Gtk2 for someone
who needs only to build atop GObject.
=back
=head1 The Glib Module
In keeping with the tenet of not requiring the entire car for someone who only
needs a single wheel, I broke the glib/gobject library family into its own
module and namespace. This has proved to be a godsend, as it has made things
very easy to debug; there's a clean separation between the base of the type
system and the stuff on top of it.
The Glib module takes care of all the basic types handled by the GObject
library --- GEnum, GFlags, GBoxed, GObject, GValue, GClosure --- as well has
signal marshalling and such in GSignal. I'll discuss each of these separately.
In practice, you will rarely see direct calls to the functions that convert
objects in and out of perl. Most code should use the C preprocessor to provide
easier-to-remember names that follow the perl API style, e.g.,
newSVGObject(obj) rather than gperl_new_object(type,obj) and SvGObject(sv)
instead of gperl_get_gobject(type, sv). The convention used in all of
gtk2-perl is described in L<Gtk2::devel>.
=head2 Wrappers
FIXME maybe this section should be rolled into the GBoxed and GObject sections?
In order to use the C data structures from Perl, we need to wrap those objects
up in Perl objects. In general, a Perl object is simply a blessed reference.
A typical scheme for representing C objects in perl is bless a reference to a
scalar holding the C pointer value; perl will destroy the reference-counted
scalar when there are no more references to it, and one would normally destroy
the underlying data structure at this point. However, GLib is a little more
complex than your typical C library, so this easy, typical setup won't work for
us.
GBoxed types are opaque wrappers for C structures, providing copy and free
functions, to allow the types to be used generically. For the most part we can
get away with using the typical scheme described above to provide an opaque
object, but in some instances an opaque object is very alien in perl. The
L<Glib::Boxed> section explains how we get around this.
GObject, on the other hand, is a type-aware, reference-counted object with
lifetime semantics that differ somewhat from perl SVs. Thus we need something
a bit more sophisticated than a plain old opaque wrapper; in fact, we use a
blessed hash reference with the pointer to the C object tucked away in attached
magic, and a pointer to the SV stored in the GObject's user data. The combined
perl/C object does some nifty reference-count borrowing to ensure that object
lifetime is managed correctly.
If an object is created by a function that returns directly to perl, then the
wrapper returned by that function should "own" the object. If no other code
assumes ownership of that object (by ref'ing a GObject or copying a GBoxed),
then the object should be destroyed when the perl scalar is destroyed
(actually, as part of its destruction).
If a function returns a preexisting object owned by someone else, then the
bindings should NOT destroy the object with the perl wrapper. How we handle
this for the various types is described below.
=head2 GType to Package Mappings
GType is the GObject library's unique type identifier; this is a runtime
variable, because GLib types may be loaded dynamically. The direct analog in
perl is the package name, which uniquely specifies an object's class. Since
these do about the same thing, we completely replace the GType with the perl
package.
For various reasons, mostly to do with robustness and performance, there is a
one-to-one mapping between GType classes and perl package names. These must be
registered, usually as part of the module initialization process.
In addition, the type system tries as hard as it can to recover when things
don't go well, using the GType system to its advantage. If you return a C
object of a type that is not registered with Gperl, such as MyCustomTypeFoo,
gperl_new_object (see below) will warn you that it has blessed the unknown
MyCustomTypeFoo into the first known package in its ancestry, Gtk2::VBox.
GBoxed and GObject have distinct mapping registries to avoid cross-pollination
and mistakes in the type system. See below.
To assist in handling inheritance that isn't specified directly by the GType
system, the function gperl_set_isa allows you to add elements to the @ISA for a
package. gperl_register_object does this for you, but you may need to add
additional parents, e.g., for implementing GInterfaces. (see
Gtk2/xs/GtkEntry.xs for an example)
You may be thinking that we could use substitution rules to map the GObject
classes to perl packages. In practice, this is a bad idea, fraught with
problems; the substitution rules are not easily extendable and are easily
broken by extension packages which don't follow the naming conventions.
=head2 GEnums and GFlags
GLib provides a mechanism for creating runtime type information about
enumeration and flag types. Enumerations are lists of specific values, one of
which may be used at at time, whereas multiple flag values may be supplied at a
time. In C flags are meant to be used with bitfields. A GType is associated
with the various valid values for a given GEnum or GFlags type as strings, in
both full-name and nickname forms.
GPerl uses this mechanism to avoid the need to know integer values for enum and
flag types at the perl level. An enum value is just a string; a bitfield of
flag values is represented as a reference to an array of strings. These
strings are the GLib-provided nicknames. For the convenience of a perl
developer, the bindings treat '-' and '_' as equivalent when looking up the
corresponding integer values during conversion.
A GEnum or GFlags type mapping should be registered with
void gperl_register_fundamental (GType gtype, const char * package);
so that their package names can be used where a GType is required (for example,
as GObject property types or GtkTreeModel column types).
The basic functions for converting between C and perl values are
/* croak if val is not part of type, otherwise return
* corresponding value. this is the general case. */
gint gperl_convert_enum (GType type, SV * val);
/* return a scalar which is the nickname of the enum value
* val, or croak if val is not a member of the enum. */
SV * gperl_convert_back_enum (GType type, gint val);
/* collapse a list of strings to an integer with all the
* correct bits set, croak if anything is invalid. */
gint gperl_convert_flags (GType type, SV * val);
/* convert a bitfield to a list of strings, or croak. */
SV * gperl_convert_back_flags (GType type, gint val);
Other utility functions allow for finer-grained control, such as the ability to
pass unknown values, which can be necessary in special cases. In general, each
of these functions raises an exception when something goes wrong. To be
helpful, they croak with a message listing the valid values when they encounter
invalid input.
=head2 GBoxed
GBoxed provides a way to register functions that create, copy, and destroy
opaque structures. For our purposes, we'll allow any perl package to inherit
from Glib::Boxed and implement accessors for the struct members, but
Glib::Boxed will handle the object and wrapper lifetime issues.
There are two functions for creating boxed wrappers:
SV * gperl_new_boxed (gpointer boxed, GType gtype, gboolean own);
SV * gperl_new_boxed_copy (gpointer boxed, GType gtype);
If own is TRUE, the wrapper returned by gperl_new_boxed will take boxed with it
when it dies. In the case of a copy, own is implied, so there's a separate
function which doesn't need the own option.
To get a boxed pointer out of a scalar wrapper, you just call
gperl_get_boxed_check --- this will croak if the sv is undef or not blessed
into the specified package.
When you register a boxed type you get the option of supplying a table of
function pointers describing how the boxed object should be wrapped, unwrapped,
and destroyed. This allows you to decide in the wrapping function what
subclass of the boxed type's class the wrapper should actually take (a trick
used by Gtk2::Gdk::Event), or represent a boxed type as a native perl type
(such as using array references for Gnome2::Canvas::Point objects). All of
this happens automagically, behind the scenes, and most types assume the
default wrapper class.
See the commentary in gperl.h for more information.
=head2 GObject
The GObject knows its own type. Thus, we need only one parameter to create a
GObject wrapper. In reality, we ask for two:
SV * gperl_new_object (GObject * object, gboolean own);
The wrapper SV will be blessed into the package corresponding to the gtype
returned by G_OBJECT_TYPE (object), that is, the bottommost type in the
inheritance chain. If that bottommost type is not known, the function walks
back up the tree until it finds one that's known, blesses the reference into
that package, and spits out a warning on stderr. To hush the warning, you need
merely call
In general, this process will claim a reference on the GObject (with
g_object_ref()), so that the C object stays alive so long as there is a perl
wrapper for it. If <i>own</i> is set to TRUE, the perl wrapper will claim
ownership of the C object by removing that reference; in theory, for a new
GObject, fresh from a constructor, this leaves the object with a single
reference owned by the perl object. The next question out of your mouth should
be, "But what about GObject derivatives that require sinking or other strange
methods to claim ownership?" For the answer, see the GtkObject section's
description of sink functions.
void gperl_register_object (GType gtype, const char * package);
This magical function also sets up the @ISA for the package to point to the
package corresponding to g_type_parent (gtype). [Since this requires the
parent package to be registered, there is a simple deferral mechanism, which
means your @ISA might not be set until the next call to gperl_register_object.]
There are two ways to get an object out of an SV (though I think only one is
really needed):
GObject * gperl_get_object (SV * sv);
GObject * gperl_get_object_check (SV * sv, GType gtype);
The second one is like the first, but croaks if the object is not derived from
gtype.
You can get and set object data and object parameters just like you'd expect.
=head2 GSignal
All of this GObject stuff wouldn't be very useful if you couldn't connect
signals and closures. I got most of my handling code from gtk2-perl and pygtk,
and it's pretty straightforward. The data member is optional, and must be a
scalar.
To connect perl subroutines to GSignals I use GClosures, which require the
handling of GValues.
=head2 GPerlClosure
Use a GPerlClosure wherever you could use a GClosure and things should work out
great. I<FIXME say more here>
=head2 GPerlCallback
Function pointers are required in many places throughout gtk+, usually for a
callback to be used as a "foreach" function or for some other purpose.
Unfortunately, a majority of these spots aren't designed to work with GClosures
(usually by lacking a way to destroy data associated with the callback when it
is no longer needed). For this purpose, the GPerlCallback wraps up the
gruntwork of using perl's call_sv to use a callback function directly.
=head1 SEE ALSO
perl(1), perlxs(1), perlguts(1), perlapi(1), perlxstut(1),
L<ExtUtils::Depends>(3pm), L<ExtUtils::PkgConfig>(3pm)
L<Glib>(3pm), L<Glib::Object::Subclass>(3pm), L<Glib::xsapi>(3pm)
=head1 AUTHOR
muppet E<lt>scott at asofyet.orgE<gt>
=head1 COPYRIGHT
Copyright (C) 2003 by the gtk2-perl team (see the file AUTHORS for the
full list)
This library is free software; you can redistribute it and/or modify it under
the terms of the GNU Library General Public License as published by the Free
Software Foundation; either version 2.1 of the License, or (at your option) any
later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. See the GNU Library General Public License for more
details.
You should have received a copy of the GNU Library General Public License along
with this library; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
=cut
Mini Shell