#!/bin/sh
#* Copyright (C) 2005-2006 Rick Richardson
#*
#* This program is free software; you can redistribute it and/or modify
#* it under the terms of the GNU General Public License as published by
#* the Free Software Foundation; either version 2 of the License, or
#* (at your option) any later version.
#*
#* This program is distributed in the hope that it will be useful,
#* but WITHOUT ANY WARRANTY; without even the implied warranty of
#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#* GNU General Public License for more details.
#*
#* You should have received a copy of the GNU General Public License
#* along with this program; if not, write to the Free Software
#* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#*
#* Authors: Rick Richardson <rick.richardson@comcast.net>
VERSION='$Id: foo2hp2600-wrapper.in,v 1.77 2011/01/20 00:59:57 rick Exp $'
#
# Printer Notes:
#
# HP Color LaserJet 1600: -z0
# HP Color LaserJet 2600n: -z0
# HP Color LaserJet CP1215: -z1
#
PROGNAME="$0"
BASENAME=`basename $PROGNAME`
PREFIX=/usr
SHARE=$PREFIX/share/foo2hp
PATH=$PATH:/sw/bin:/opt/local/bin
#
# Log the command line, for debugging and problem reports
#
if [ -x /usr/bin/logger -o -x /bin/logger ]; then
logger -t "$BASENAME" -p lpr.info -- "$BASENAME $@" </dev/null
fi
usage() {
cat <<EOF
Usage:
$BASENAME [options] [ps-file]
Foomatic printer wrapper for the foo2hp2600 printer driver.
This script reads a Postscript ps-file or standard input
and converts it to Zenographics ZjStream printer format.
Normal Options:
-b bits Bits per plane (1 or 2) [$BPP]
-c Print in color (else monochrome)
-d duplex Duplex code to send to printer [$DUPLEX]
1=off, 2=longedge, 3=shortedge
-m media Media code to send to printer [$MEDIA]
1=standard, 2=transparency, 3=glossy, 257=envelope,
259=letterhead, 261=thickstock, 262=postcard, 263=labels
-p paper Paper code [$PAPER]
1=letter, 5=legal, 7=executive, 9=A4, 11=A5, 13=B5
20=env#10, 27=envDL 28=envC5 34=envB5 37=envMonarch
-n copies Number of copies [$COPIES]
-r <xres>x<yres> Set device resolution in pixels/inch [$RES]
-s source Source code to send to printer [$SOURCE]
1=tray2, 2=tray3, 4=manual/tray1, 7=auto
Code numbers may vary with printer model.
-t Draft mode. Every other pixel is white.
-2/-3/-4/-6/-8/-10/-12/-14/-15/-16/-18
Print with N-up (requires psutils)
-o orient For N-up: -op is portrait, -ol is landscape, -os is seascape.
Printer Tweaking Options:
-u <xoff>x<yoff> Set offset of upper left printable in pixels [varies]
-l <xoff>x<yoff> Set offset of lower right printable in pixels [varies]
-L mask Send logical clipping values from -u/-l in ZjStream [3]
0=no, 1=Y, 2=X, 3=XY
-P Do not output START_PLANE codes. May be needed by some
monochrome-only printers.
-X padlen Add extra zero padding to the end of BID segments [16]
-z model Model: 0=HP CLJ 1600/2600n; 1=HP CLJ CP1215 [$MODEL]
-O parm=val Alignment of CMYK. "parm" is c,m,y, or k. "val" is in rows.
Color Tweaking Options:
-g gsopts Additional options to pass to Ghostscript, such as
-dDITHERPPI=nnn, etc. May appear more than once. []
-G profile.icm Convert profile.icm to a Postscript CRD using icc2ps and
adjust colors using the setcolorrendering PS operator.
$SHARE/icm/ will be searched for profile.icm.
-I intent Select profile intent from ICM file [$INTENT]
0=Perceptual, 1=Colorimetric, 2=Saturation, 3=Absolute
-G gamma-file.ps Prepend gamma-file to the Postscript input to perform
color correction using the setcolortransfer PS operator.
Debugging Options:
-S plane Output just a single color plane from a color print [all]
1=Cyan, 2=Magenta, 3=Yellow, 4=Black
-D lvl Set Debug level [$DEBUG]
-V $VERSION
EOF
exit 1
}
#
# Report an error and exit
#
error() {
echo "$BASENAME: $1" >&2
exit 1
}
dbgcmd() {
if [ $DEBUG -ge 1 ]; then
echo "$@" >&2
fi
"$@"
}
#
# Portable version of 'which'
#
pathfind() {
if [ "$1" = -p ]; then
optp=1
shift
else
optp=0
fi
OLDIFS="$IFS"
IFS=:
for p in $PATH; do
if [ -x "$p/$*" ]; then
if [ $optp = 1 ]; then
echo "$p/$*"
fi
IFS="$OLDIFS"
return 0
fi
done
IFS="$OLDIFS"
return 1
}
#
# Returns true if $1 is 32-bit binary
#
is32() {
if pathfind file; then
path=`pathfind -p "$*"`
is32=`file -L "$path" | grep 32-bit`
if [ "$is32" = "" ]; then
return 1
else
return 0
fi
else
return 1
fi
}
#
# N-up-ify the job. Requires psnup from psutils package
#
nup() {
case "$NUP" in
[2368]|1[0458])
tr '\r' '\n' | psnup $NUP_ORIENT -d2 -$NUP -m.3in -p$paper -q
;;
[49]|1[26])
tr '\r' '\n' | psnup $NUP_ORIENT -d2 -$NUP -m.5in -p$paper -q
;;
*)
error "Illegal call to nup()."
;;
esac
}
#
# Process the options
#
# Try to use a local copy of GhostScript 8.54, if available. Otherwise,
# fallback to whatever the Linux distro has installed (usually 7.07)
#
# N.B. := operator used here, when :- would be better, because "ash"
# doesn't have :-
if eval gs.foo -v >/dev/null 2>&1; then
GSBIN=${GSBIN:-gs.foo}
else
GSBIN=${GSBIN:-gs}
fi
CMDLINE="$*"
DEBUG=0
DUPLEX=1
BPP=1
COLOR=
COLORMODE=default
MODEL=0
QUALITY=1
QUALITY=wts
MEDIA=1
COPIES=1
test -r /etc/papersize && PAPER=$(cat /etc/papersize)
test "$PAPER" || PAPER=1
RES=600x600
SOURCE=7
NUP=
CLIP_UL=
CLIP_LR=
CLIP_LOG=
BC=
AIB=
NOPLANES=
COLOR2MONO=
GAMMAFILE=default
INTENT=0
GSOPTS=
EXTRAPAD=
SAVETONER=
NUP_ORIENT=
OFF_C=0
OFF_M=0
OFF_Y=0
OFF_K=0
GSDEV=-sDEVICE=pbmraw
SEGFAULT=0
# What mode to use if the user wants us to pick the "best" mode
case `$GSBIN --version` in
7*)
DEFAULTCOLORMODE=10
;;
8.1*)
# Buggy 8.14/8.15 in Ubuntu
DEFAULTCOLORMODE=10
if is32 $GSBIN; then
GAMMAFILE=km2430_2.icm
else
GAMMAFILE=hpclj2600n-0.icm
SEGFAULT=1
fi
QUALITY=1
;;
*)
DEFAULTCOLORMODE=10
;;
esac
while getopts "1:23456789o:b:cC:d:g:l:u:L:m:n:p:q:r:s:tz:ABS:D:G:I:PO:X:Vh?-" opt
do
case $opt in
b) BPP="$OPTARG";;
c) COLOR=-c;;
d) DUPLEX="$OPTARG";;
g) GSOPTS="$GSOPTS $OPTARG";;
m) MEDIA="$OPTARG";;
n) COPIES="$OPTARG";;
p) PAPER="$OPTARG";;
q) QUALITY="$OPTARG";;
r) RES="$OPTARG";;
s) SOURCE="$OPTARG";;
t) SAVETONER="-t";;
z) MODEL="$OPTARG";;
l) CLIP_LR="-l $OPTARG";;
u) CLIP_UL="-u $OPTARG";;
L) CLIP_LOG="-L $OPTARG";;
A) AIB=-A;;
B) BC=-B;;
C) COLORMODE="$OPTARG";;
S) COLOR2MONO="-S$OPTARG";;
D) DEBUG="$OPTARG";;
G) GAMMAFILE="$OPTARG";;
I) INTENT="$OPTARG";;
O) case "$OPTARG" in
c=*|C=*) OFF_C=`echo "$OPTARG" | sed "s/^..//"`;;
m=*|M=*) OFF_M=`echo "$OPTARG" | sed "s/^..//"`;;
y=*|Y=*) OFF_Y=`echo "$OPTARG" | sed "s/^..//"`;;
k=*|K=*) OFF_K=`echo "$OPTARG" | sed "s/^..//"`;;
*) error "Not [cmyk]=NUM!";;
esac
;;
P) NOPLANES=-P;;
X) EXTRAPAD="-X $OPTARG";;
[234689]) NUP="$opt";;
[57]) error "Can't find acceptable layout for $opt-up";;
1) case "$OPTARG" in
[024568]) NUP="1$OPTARG";;
*) error "Can't find acceptable layout for 1$OPTARG-up";;
esac
;;
o) case "$OPTARG" in
l*) NUP_ORIENT=-l;;
s*) NUP_ORIENT=-r;;
p*|*) NUP_ORIENT=;;
esac;;
-)
echo aaa
echo "$OPTARG";
;;
V) echo "$VERSION"; foo2hp -V; foo2zjs-pstops -V; exit 0;;
h|\?)
if [ "$CMDLINE" != "-?" -a "$CMDLINE" != -h ]; then
echo "Illegal command:"
echo " $0 $CMDLINE"
echo
fi
usage;;
esac
done
shift `expr $OPTIND - 1`
#
# If there is an argument left, take it as the file to print.
# Else, the input comes from stdin.
#
if [ $# -ge 1 ]; then
if [ "$LPJOB" = "" ]; then
: # LPJOB="$1"
fi
exec < $1
fi
#
# Select the ghostscript device to use
#
case "$BPP" in
1) if [ "" = "$COLOR" ]; then
GSDEV=-sDEVICE=pbmraw
else
GSDEV=-sDEVICE=bitcmyk
fi
case "$GAMMAFILE" in
default)
case "$MODEL" in
0)
if [ $SEGFAULT = 0 ]; then
GAMMAFILE=hpclj2600n-1.icm
else
GAMMAFILE=hpclj2600n-0.icm
fi
;;
1)
GAMMAFILE=hp1215-argyll-0.icm
;;
esac
;;
none) GAMMAFILE=;;
esac
;;
2) if [ "" = "$COLOR" ];
then
# GSDEV=-sDEVICE=pgmraw
# error "2-bpp monochrome is not yet supported"
GSDEV="-sDEVICE=cups -dcupsColorSpace=3 -dcupsBitsPerColor=2"
GSDEV="$GSDEV -dcupsColorOrder=2"
else
GSDEV="-sDEVICE=cups -dcupsColorSpace=6 -dcupsBitsPerColor=2"
GSDEV="$GSDEV -dcupsColorOrder=2"
fi
if [ $GSBIN = "gs.foo" ]; then
GSBIN=gs
fi
case "$GAMMAFILE" in
default)
case "$MODEL" in
0)
if is32 $GSBIN; then
GAMMAFILE=km2430_2.icm
GAMMAFILE=hpclj2600n-1.icm
else
GAMMAFILE=
fi
;;
1)
GAMMAFILE=hp1215-argyll-0.icm
;;
esac
;;
none) GAMMAFILE=;;
esac
;;
*) error "Illegal number of bits per plane ($BPP)";;
esac
#
# Validate model code
#
case "$MODEL" in
0|1) ;;
*) error "Unknown model code $MODEL";;
esac
#
case "$QUALITY" in
0)
GSOPTS="-dCOLORSCREEN $GSOPTS"
;;
1)
GSOPTS="-dCOLORSCREEN $GSOPTS"
;;
2)
GSOPTS="-dMaxBitmap=500000000 $GSOPTS"
;;
as)
GSOPTS="-dCOLORSCREEN -dMaxBitmap=500000000 $GSOPTS"
;;
wts)
GSOPTS="-dCOLORSCREEN -dMaxBitmap=500000000 $GSOPTS"
;;
esac
#
# Validate media code
#
case "$MEDIA" in
1|plain) MEDIA=1;;
514|preprinted) MEDIA=514;;
513|letterhead) MEDIA=513;;
2|transparency) MEDIA=2;;
515|prepunched) MEDIA=515;;
265|labels) MEDIA=265;;
260|bond) MEDIA=260;;
516|recycled) MEDIA=516;;
512|color) MEDIA=512;;
276|tough) MEDIA=276;;
267|envelope) MEDIA=267;;
258|light) MEDIA=258;;
262|heavy) MEDIA=262;;
261|cardstock) MEDIA=261;;
268|lightglossy) MEDIA=268;;
269|glossy) MEDIA=269;;
270|heavyglossy) MEDIA=270;;
277|cover) MEDIA=277;;
278|photo) MEDIA=278;;
[0-9]*) ;;
*) error "Unknown media code $MEDIA";;
esac
#
# Validate source (InputSlot) code
#
case "$SOURCE" in
1|tray2) SOURCE=1;;
4|tray1) SOURCE=4;;
7|auto) SOURCE=7;;
[0-9]*) ;;
*) error "Unknown source code $SOURCE";;
esac
#
# Validate Duplex code
#
case "$DUPLEX" in
1|off|none) DUPLEX=1;;
2|long*) DUPLEX=2;;
3|short*) DUPLEX=3;;
[0-9]*) ;;
*) error "Unknown duplex code $DUPLEX";;
esac
#
# Validate Resolution
#
case "$RES" in
600x600) ;;
1200x600) ;;
2400x600) ;;
*) error "Illegal resolution $RES";;
esac
#
# Figure out the paper dimensions in pixels/inch, and set the
# default clipping region. Unfortunately, this is a trouble
# area for ZjStream printers. Various versions of ZjS print
# engines react differently when asked to print into their
# unprintable regions.
#
set_clipping() {
ulx=$1; uly=$2
lrx=$3; lry=$4
# Set clipping region if it isn't already set
if [ "$CLIP_UL" = "" ]; then
case "$RES" in
600x600) ulx=`expr $ulx / 2`;;
2400x600) ulx=`expr $ulx \* 2`;;
esac
CLIP_UL="-u ${ulx}x${uly}"
fi
if [ "$CLIP_LR" = "" ]; then
case "$RES" in
600x600) lrx=`expr $lrx / 2`;;
2400x600) lrx=`expr $lrx \* 2`;;
esac
CLIP_LR="-l ${lrx}x${lry}"
fi
}
case "$PAPER" in
Custom*x*)
# Command line only
XDIM=`echo "$PAPER" | sed -e "s/Custom.//" -e "s/x.*//" `
YDIM=`echo "$PAPER" | sed -e "s/.*x//" `
if [ "$XDIM" = "" -o "$YDIM" = "" ]; then
error "Custom page size '$PAPER' != 1-99999"
fi
if [ "$XDIM" -eq 0 -o "$YDIM" -eq 0 ]; then
error "Custom page size '$PAPER' != 1-99999"
fi
XDIM=`dc -e "$XDIM 1200* 72/p"`
YDIM=`dc -e "$YDIM 600* 72/p"`
PAPER=1; paper=letter;
set_clipping 2 80 2 80
;;
Custom*)
#%%BeginFeature: *CustomPageSize True
#216
#360
#0
#0
#0
#pop pop pop pop pop
#%%BeginFeature: *CustomPageSize True
#792.000000 612.000000 1 0.000000 0.000000
#pop pop pop pop pop
if [ $DEBUG = 0 ]; then
TMPFILE=/tmp/cus$$
else
TMPFILE=/tmp/custom.ps
fi
cat >$TMPFILE
exec <$TMPFILE
tmp=`head -n 10000 $TMPFILE \
| sed -n '/CustomPageSize/{n;p;n;p;}' \
| tr '\n' ' '`
case "$tmp" in
[0-9]*\ [0-9]*)
XDIM=`echo "$tmp" | sed 's/ .*//'`
YDIM=`echo "$tmp" | sed -e 's/^[^ ]* //' -e 's/ .*//'`
;;
*)
if [ $DEBUG = 0 ]; then rm -f $TMPFILE; fi
error "Custom page size [XY]DIM != 1-99999"
;;
esac
XDIM=`dc -e "$XDIM 1200* 72/p"`
YDIM=`dc -e "$YDIM 600* 72/p"`
PAPER=1; paper=letter;
set_clipping 2 80 2 80
;;
1|letter) PAPER=1; paper=letter; XDIM="10200"; YDIM="6600"
set_clipping 172 80 172 80
;;
5|legal) PAPER=5; paper=legal; XDIM="10200"; YDIM="8400"
set_clipping 172 80 172 80
;;
7|executive) PAPER=7; paper=executive; XDIM="8700"; YDIM="6300"
set_clipping 174 78 174 78
;;
9|a4|A4) PAPER=9; paper=a4; XDIM="9920"; YDIM="7016"
set_clipping 176 84 176 84
;;
11|a5|A5) PAPER=11; paper=a5; XDIM="6992"; YDIM="4960"
set_clipping 176 80 176 80
;;
13|b5|B5|b5jis) PAPER=13; paper=b5; XDIM="8598"; YDIM="6070"
set_clipping 172 83 171 83
;;
20|"env#10") PAPER=20; paper=env10; XDIM="4950"; YDIM="5700"
set_clipping 171 78 171 78
;;
27|envDL) PAPER=27; paper=envDL; XDIM="5200"; YDIM="5200"
set_clipping 176 84 176 84
;;
28|envC5) PAPER=28; paper=envC5; XDIM="7650"; YDIM="5408"
set_clipping 170 80 169 80
;;
34|envB5) PAPER=34; paper=envB5; XDIM="8316"; YDIM="5892"
set_clipping 174 74 174 74
;;
37|envMonarch) PAPER=37; paper=envMonarch;XDIM="4650"; YDIM="4500"
set_clipping 174 78 173 78
;;
*) error "Unimplemented paper code $PAPER";;
esac
# e.g. /usr/share/ghostscript/7.07/lib/gs_statd.ps
PAPERSIZE="-sPAPERSIZE=$paper";
case "$RES" in
600x600) XDIM=`expr $XDIM / 2`;;
1200x600) ;;
2400x600) XDIM=`expr $XDIM \* 2`;;
esac
DIM="${XDIM}x${YDIM}"
#
# Filter thru psnup if N-up printing has been requested
#
case $NUP in
[234689]|1[024568]) PREFILTER="nup";;
*) PREFILTER=cat;;
esac
if [ "$DEBUG" -ge 9 ]; then
PREFILTER="tee /tmp/$BASENAME.ps"
fi
#
# Overload -G. If the file name ends with ".icm" or ".ICM"
# then convert the ICC color profile to a Postscript CRD,
# then prepend it to the users job. Select the intent
# using the -I option.
#
create_crd() {
#
# Create a Postscript CRD
#
ICC2PS=$PREFIX/bin/foo2zjs-icc2ps
if [ -x $ICC2PS ]; then
case "$GAMMAFILE" in
none.icm | */none.icm)
;;
*)
if [ -x /usr/bin/logger ]; then
logger -t "$BASENAME" -p lpr.info -- \
"`basename $ICC2PS` -o $GAMMAFILE -t$INTENT > $ICCTMP.crd.ps"
fi
$ICC2PS -o $GAMMAFILE -t$INTENT > $ICCTMP.crd.ps 2>$ICCTMP.log \
|| error "Problem converting .ICM file to Postscript"
;;
esac
PSTOPS_OPTS="$PSTOPS_OPTS -c"
cat > $ICCTMP.usecie.ps <<-EOF
%!PS-Adobe-3.0
<</UseCIEColor true>>setpagedevice
EOF
if [ "$QUALITY" = wts -o "$QUALITY" = as ]; then
if [ "$QUALITY" = wts ]; then
cat >> $ICCTMP.usecie.ps <<-EOF
<< /UseWTS true >> setuserparams
EOF
else
cat >> $ICCTMP.usecie.ps <<-EOF
<< /UseWTS false >> setuserparams
EOF
fi
cat >> $ICCTMP.usecie.ps <<-EOF
<<
/AccurateScreens true
/HalftoneType 1
/HalftoneName (Round Dot Screen) cvn
/SpotFunction { 180 mul cos exch 180 mul cos add 2 div}
/Frequency 137
/Angle 37
>> sethalftone
EOF
fi
cat > $ICCTMP.selcrd.ps <<-EOF
/Current /ColorRendering findresource setcolorrendering
EOF
case "$GAMMAFILE" in
none.icm | */none.icm) GAMMAFILE="$ICCTMP.usecie.ps";;
*) GAMMAFILE="$ICCTMP.usecie.ps $ICCTMP.crd.ps $ICCTMP.selcrd.ps";;
esac
else
GAMMAFILE=
fi
}
if [ $DEBUG -gt 0 ]; then
ICCTMP=/tmp/icc
else
ICCTMP=/tmp/icc$$
fi
if [ "" = "$COLOR" ]; then
COLORMODE=
GAMMAFILE=
else
case "$COLORMODE" in
default) COLORMODE=$DEFAULTCOLORMODE;;
esac
fi
CRDBASE="$PREFIX/share/foo2zjs/crd"
PSFILES="$PREFIX/share/foo2hp/psfiles"
case "$RES" in
600x600) SCREEN=screen1200.ps;;
1200x600) SCREEN=screen1200.ps;;
2400x600) SCREEN=screen2400.ps;;
esac
PSTOPS_OPTS="-n"
case "$COLORMODE" in
0|"")
# Monochrome
;;
10|icm)
# Use old ICM method
AIB=-A
BC=-B
case "$GAMMAFILE" in
none.icm | */none.icm)
create_crd
;;
*.icm|*.ICM|*.icc|*.ICC)
#
# Its really an .ICM file, not a gamma file.
#
# The file can be a full path name, or the name of a file in $SHARE/icm/
#
if [ -r "$GAMMAFILE" ]; then
create_crd
elif [ -r "$SHARE/icm/$GAMMAFILE" ]; then
GAMMAFILE="$SHARE/icm/$GAMMAFILE"
create_crd
else
GAMMAFILE=
fi
;;
esac
;;
*.crd)
GAMMAFILE="$CRDBASE/prolog.ps"
if [ -f $COLORMODE ]; then
GAMMAFILE="$GAMMAFILE $COLORMODE"
elif [ -f $CRDBASE/$COLORMODE ]; then
GAMMAFILE="$GAMMAFILE $CRDBASE/$COLORMODE"
else
error "Can't find CRD '$COLORMODE' in . or in $CRDBASE"
fi
GAMMAFILE="$GAMMAFILE $CRDBASE/$SCREEN"
;;
*)
error "Unknown color method '$COLORMODE'"
;;
esac
if [ "$COLOR" != "" -a "$QUALITY" = wts ]; then
PSTOPS_OPTS="$PSTOPS_OPTS -w"
elif [ "$COLOR" != "" -a "$QUALITY" = as ]; then
PSTOPS_OPTS="$PSTOPS_OPTS -a"
fi
if [ "" != "$COLOR" ]; then
if [ "" = "$AIB" -a "" = "$BC" ]; then
# Faster, but can't handle AllIsBlack or BlackClears
: #GSDEV=-sDEVICE=pksmraw
else
# Can't handle different size pages
: #GSDEV=-sDEVICE=bitcmyk
fi
fi
#
# Figure out USERNAME
#
if [ "$LPUSER" != "" ]; then
USER="$LPUSER@$LPHOST"
else
USER=""
fi
#
# Main Program, just cobble together the pipeline and run it
#
# The malarky with file descriptors 1 and 3 is to avoid a bug in
# (some versions?) of Ghostscript where Postscript's stdout gets
# intermingled with the printer drivers output, resulting in
# corrupted image data.
#
# CUPS also does grief by adding its own PS code to the input file.
# We take care of that with the sed command. Thus, Well Tempered
# Screening now works!
#
GS="$GSBIN -q -dBATCH -dSAFER -dQUIET -dNOPAUSE -dNOINTERPOLATE"
foo2zjs-pstops $PSTOPS_OPTS | \
$PREFILTER \
| ($GS $PAPERSIZE -g$DIM -r$RES $GSDEV $GSOPTS \
-sOutputFile="|cat 1>&3" $GAMMAFILE -_ >/dev/null 2>&1) 3>&1 \
| foo2hp -r$RES -g$DIM -p$PAPER -m$MEDIA -n$COPIES -d$DUPLEX -s$SOURCE \
$COLOR -b$BPP $CLIP_UL $CLIP_LR $CLIP_LOG $SAVETONER \
-O$OFF_C,$OFF_M,$OFF_Y,$OFF_K -J "$LPJOB" -U "$USER" \
$BC $AIB $COLOR2MONO $NOPLANES $EXTRAPAD -D$DEBUG
#
# Log the command line, for debugging and problem reports
#
if [ -x /usr/bin/logger ]; then
logger -t "$BASENAME" -p lpr.info -- \
"$GSBIN $PAPERSIZE -g$DIM -r$RES $GSDEV $GSOPTS $GAMMAFILE"
logger -t "$BASENAME" -p lpr.info -- \
"foo2hp -r$RES -g$DIM -p$PAPER -m$MEDIA \
-n$COPIES -d$DUPLEX -s$SOURCE $COLOR -b$BPP $CLIP_UL $CLIP_LR $CLIP_LOG \
$SAVETONER -O$OFF_C,$OFF_M,$OFF_Y,$OFF_K $BC $AIB $COLOR2MONO $NOPLANES $EXTRAPAD"
fi
#
# Remove cruft
#
if [ $DEBUG -eq 0 ]; then
for i in crd.ps log usecie.ps selcrd.ps
do
file="$ICCTMP.$i"
[ -f $file ] && rm -f $file
done
[ -f "$TMPFILE" ] && rm -f $TMPFILE
fi
exit 0
Mini Shell