#!/bin/sh
#* Copyright (C) 2013 Rick Richardson
#*
#* This program is free software; you can redistribute it and/or modify
#* it under the terms of the GNU General Public License as published by
#* the Free Software Foundation; either version 2 of the License, or
#* (at your option) any later version.
#*
#* This program is distributed in the hope that it will be useful,
#* but WITHOUT ANY WARRANTY; without even the implied warranty of
#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#* GNU General Public License for more details.
#*
#* You should have received a copy of the GNU General Public License
#* along with this program; if not, write to the Free Software
#* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#*
#* Authors: Rick Richardson <rick.richardson@comcast.net>
VERSION='$Id: foo2hbpl2-wrapper.in,v 1.11 2015/10/11 19:24:50 rick Exp $'
#
# Printer Notes:
#
# Dell 1355 Multifunction Color Printer
# Dell C1765 Multifunction Color Printer
# Epson AcuLaser M1400
# Epson AcuLaser CX17NF
# Fuji Xerox DocuPrint CM205 Multifunction Color Printer
# Fuji Xerox DocuPrint CM215 Multifunction Color Printer
# Fuji Xerox DocuPrint M215
# Fuji Xerox DocuPrint P205
# Xerox WorkCentre 3045 Multifunction Monochrome Printer
# Xerox WorkCentre 6015 Multifunction Color Printer
#
PROGNAME="$0"
BASENAME=`basename $PROGNAME`
PREFIX=/usr
SHARE=$PREFIX/share/foo2hbpl
PATH=$PATH:/sw/bin:/opt/local/bin
#
# Log the command line, for debugging and problem reports
#
if [ -x /usr/bin/logger -o -x /bin/logger ]; then
logger -t "$BASENAME" -p lpr.info -- "$BASENAME $@" </dev/null
fi
usage() {
cat <<EOF
Usage:
$BASENAME [options] [ps-file]
Foomatic printer wrapper for the foo2hbpl2 printer driver.
This script reads a Postscript ps-file or standard input
and converts it to a Xerox HBPL version 2 stream.
Normal Options:
-c Print in color (else monochrome)
-C colormode Colormode [$COLORMODE]
10=ICM RGB color profile (using -G *.icm file)
-d duplex Duplex code to send to printer [$DUPLEX]
1=off, 2=longedge, 3=shortedge
-m media Media code to send to printer [$MEDIA]
1=plain, 2=bond, 3=lwcard, 4=lwgcard, 5=labels,
6=envelope, 7=recycled, 8=plain2, 9=bond2,
10=lwcard2, 11=lwgcard2, 12=recycled2
-p paper Paper code [$PAPER]
1=A4, 2=B5, 3=A5, 4=letter, 5=executive,
6=fanfoldgermanlegal/folio, 7=legal, 9=env#10,
10=envMonarch, 11=envC5, 12=envDL
-n copies Number of copies [$COPIES]
-r <xres>x<yres> Set device resolution in pixels/inch [$RES]
-s source Source code to send to printer [$SOURCE]
1=upper, 2=lower, 4=manual, 7=auto
Code numbers may vary with printer model.
-t Draft mode. Every other pixel is white.
-2/-3/-4/-6/-8/-10/-12/-14/-15/-16/-18
Print with N-up (requires psutils)
-o orient For N-up: -op is portrait, -ol is landscape, -os is seascape.
Printer Tweaking Options:
-u <xoff>x<yoff> Set offset of upper left printable in pixels [varies]
-l <xoff>x<yoff> Set offset of lower right printable in pixels [varies]
-L mask Send logical clipping values from -u/-l in ZjStream [3]
0=no, 1=Y, 2=X, 3=XY
-P Do not output START_PLANE codes. May be needed by some
monochrome-only printers.
-X padlen Add extra zero padding to the end of BID segments [16]
Color Tweaking Options:
-g gsopts Additional options to pass to Ghostscript, such as
-dDITHERPPI=nnn, etc. May appear more than once. []
-G profile.icm Convert profile.icm to a Postscript CRD using icc2ps and
adjust colors using the setcolorrendering PS operator.
$SHARE/icm/ will be searched for profile.icm.
-I intent Select profile intent from ICM file [$INTENT]
0=Perceptual, 1=Colorimetric, 2=Saturation, 3=Absolute
-G gamma-file.ps Prepend gamma-file to the Postscript input to perform
color correction using the setcolortransfer PS operator.
Debugging Options:
-S plane Output just a single color plane from a color print [all]
1=Cyan, 2=Magenta, 3=Yellow, 4=Black
-D lvl Set Debug level [$DEBUG]
-V $VERSION
EOF
exit 1
}
#
# Report an error and exit
#
error() {
echo "$BASENAME: $1" >&2
exit 1
}
dbgcmd() {
if [ $DEBUG -ge 1 ]; then
echo "$@" >&2
fi
"$@"
}
#
# N-up-ify the job. Requires psnup from psutils package
#
nup() {
case "$NUP" in
[2368]|1[0458])
tr '\r' '\n' | psnup $NUP_ORIENT -d2 -$NUP -m.3in -p$paper -q
;;
[49]|1[26])
tr '\r' '\n' | psnup $NUP_ORIENT -d2 -$NUP -m.5in -p$paper -q
;;
*)
error "Illegal call to nup()."
;;
esac
}
#
# Process the options
#
# Try to use a local copy of GhostScript 8.54, if available. Otherwise,
# fallback to whatever the Linux distro has installed (usually 7.07)
#
# N.B. := operator used here, when :- would be better, because "ash"
# doesn't have :-
if eval gs.foo -v >/dev/null 2>&1; then
GSBIN=${GSBIN:-gs.foo}
else
GSBIN=${GSBIN:-gs}
fi
CMDLINE="$*"
DEBUG=0
DUPLEX=1
COLOR=
COLORMODE=default
MODEL=0
QUALITY=1
QUALITY=wts
MEDIA=1 # plain
COPIES=1
PAPER=4 # letter
RES=1200x600
SOURCE=1
NUP=
CLIP_UL=
CLIP_LR=
CLIP_LOG=
BC=
AIB=
NOPLANES=
COLOR2MONO=
GAMMAFILE=default
INTENT=0
GSOPTS=
EXTRAPAD=
SAVETONER=
NUP_ORIENT=
GSDEV=-sDEVICE=pbmraw
# What mode to use if the user wants us to pick the "best" mode
case `$GSBIN --version` in
7*) DEFAULTCOLORMODE=10
DEFAULTCOLORMODE=1
;;
8.1*)
DEFAULTCOLORMODE=1
QUALITY=1
;;
*) DEFAULTCOLORMODE=1
;;
esac
while getopts "1:23456789o:b:cC:d:g:l:u:L:m:n:p:q:r:s:tz:ABS:D:G:I:PX:Vh?" opt
do
case $opt in
b) GSBIN="$OPTARG";;
c) COLOR=-c;;
d) DUPLEX="$OPTARG";;
g) GSOPTS="$GSOPTS $OPTARG";;
m) MEDIA="$OPTARG";;
n) COPIES="$OPTARG";;
p) PAPER="$OPTARG";;
q) QUALITY="$OPTARG";;
r) RES="$OPTARG";;
s) SOURCE="$OPTARG";;
t) SAVETONER="-t";;
z) MODEL="$OPTARG";;
l) CLIP_LR="-l $OPTARG";;
u) CLIP_UL="-u $OPTARG";;
L) CLIP_LOG="-L $OPTARG";;
A) AIB=-A;;
B) BC=-B;;
C) COLORMODE="$OPTARG";;
S) COLOR2MONO="-S$OPTARG";;
D) DEBUG="$OPTARG";;
G) GAMMAFILE="$OPTARG";;
I) INTENT="$OPTARG";;
P) NOPLANES=-P;;
X) EXTRAPAD="-X $OPTARG";;
[234689]) NUP="$opt";;
[57]) error "Can't find acceptable layout for $opt-up";;
1) case "$OPTARG" in
[024568]) NUP="1$OPTARG";;
*) error "Can't find acceptable layout for 1$OPTARG-up";;
esac
;;
o) case "$OPTARG" in
l*) NUP_ORIENT=-l;;
s*) NUP_ORIENT=-r;;
p*|*) NUP_ORIENT=;;
esac;;
V) echo "$VERSION"; foo2hbpl -V; foo2zjs-pstops -V; exit 0;;
h|\?)
if [ "$CMDLINE" != "-?" -a "$CMDLINE" != -h ]; then
echo "Illegal command:"
echo " $0 $CMDLINE"
echo
fi
usage;;
esac
done
shift `expr $OPTIND - 1`
#
# If there is an argument left, take it as the file to print.
# Else, the input comes from stdin.
#
if [ $# -ge 1 ]; then
if [ "$LPJOB" = "" ]; then
: # LPJOB="$1"
fi
exec < $1
fi
#
case "$QUALITY" in
0)
GSOPTS="-dCOLORSCREEN $GSOPTS"
;;
1)
GSOPTS="-dCOLORSCREEN $GSOPTS"
;;
2)
GSOPTS="-dMaxBitmap=500000000 $GSOPTS"
;;
as)
GSOPTS="-dCOLORSCREEN -dMaxBitmap=500000000 $GSOPTS"
;;
wts)
GSOPTS="-dCOLORSCREEN -dMaxBitmap=500000000 $GSOPTS"
;;
esac
#
# Validate model code
#
case "$MODEL" in
0|1|2|3) ;;
*) error "Unknown model code $MODEL";;
esac
#
# Validate media code
#
case "$MEDIA" in
1|plain) MEDIA=1;;
2|bond) MEDIA=2;;
3|lwcard) MEDIA=3;;
4|lwgcard) MEDIA=4;;
5|labels) MEDIA=5;;
6|envelope) MEDIA=6;;
7|recycled) MEDIA=7;;
8|plain2) MEDIA=1;;
9|bond2) MEDIA=2;;
10|lwcard2) MEDIA=3;;
11|lwgcard2) MEDIA=4;;
12|recycled2) MEDIA=7;;
[0-9]*) ;;
*) error "Unknown media code $MEDIA";;
esac
#
# Validate source (InputSlot) code
#
case "$SOURCE" in
1|auto) SOURCE=1;;
2|manual) SOURCE=2;;
3|multi) SOURCE=3;;
4|tray1) SOURCE=4;;
[0-9]*) ;;
*) error "Unknown source code $SOURCE";;
esac
#
# Validate Duplex code
#
case "$DUPLEX" in
1|off|none) DUPLEX=1;;
2|long*) DUPLEX=2;;
3|short*) DUPLEX=3;;
[0-9]*) ;;
*) error "Unknown duplex code $DUPLEX";;
esac
#
# Validate Resolution
#
case "$RES" in
600x600) ;;
1200x600) ;;
1200x1200) ;;
#2400x600) ;;
*) error "Illegal resolution $RES";;
esac
#
# Figure out the paper dimensions in pixels/inch, and set the
# default clipping region. Unfortunately, this is a trouble
# area for ZjStream printers. Various versions of ZjS print
# engines react differently when asked to print into their
# unprintable regions.
#
set_clipping() {
ulx=$1; uly=$2
lrx=$3; lry=$4
# Set clipping region if it isn't already set
if [ "$CLIP_UL" = "" ]; then
case "$RES" in
600x600) ulx=`expr $ulx / 2`;;
2400x600) ulx=`expr $ulx \* 2`;;
esac
CLIP_UL="-u ${ulx}x${uly}"
fi
if [ "$CLIP_LR" = "" ]; then
case "$RES" in
600x600) lrx=`expr $lrx / 2`;;
2400x600) lrx=`expr $lrx \* 2`;;
esac
CLIP_LR="-l ${lrx}x${lry}"
fi
}
case "$PAPER" in
Custom*x*)
# Command line only
XDIM=`echo "$PAPER" | sed -e "s/Custom.//" -e "s/x.*//" `
YDIM=`echo "$PAPER" | sed -e "s/.*x//" `
if [ "$XDIM" = "" -o "$YDIM" = "" ]; then
error "Custom page size '$PAPER' != 1-99999"
fi
if [ "$XDIM" -eq 0 -o "$YDIM" -eq 0 ]; then
error "Custom page size '$PAPER' != 1-99999"
fi
XDIM=`dc -e "$XDIM 1200* 72/p"`
YDIM=`dc -e "$YDIM 600* 72/p"`
PAPER=0; paper=letter;
# Doesn't work on a real printer - smudges.
# set_clipping 2 100 2 100
set_clipping 150 100 150 100
;;
Custom*)
#%%BeginFeature: *CustomPageSize True
#216
#360
#0
#0
#0
#pop pop pop pop pop
#%%BeginFeature: *CustomPageSize True
#792.000000 612.000000 1 0.000000 0.000000
#pop pop pop pop pop
if [ $DEBUG = 0 ]; then
TMPFILE=/tmp/cus$$
else
TMPFILE=/tmp/custom.ps
fi
cat >$TMPFILE
exec <$TMPFILE
tmp=`head -n 10000 $TMPFILE \
| sed -n '/CustomPageSize/{n;p;n;p;}' \
| tr '\n' ' '`
case "$tmp" in
[0-9]*\ [0-9]*)
XDIM=`echo "$tmp" | sed 's/ .*//'`
YDIM=`echo "$tmp" | sed -e 's/^[^ ]* //' -e 's/ .*//'`
;;
*)
if [ $DEBUG = 0 ]; then rm -f $TMPFILE; fi
error "Custom page size [XY]DIM != 1-99999"
;;
esac
XDIM=`dc -e "$XDIM 1200* 72/p"`
YDIM=`dc -e "$YDIM 600* 72/p"`
PAPER=0; paper=letter;
# Doesn't work on a real printer - smudges.
# set_clipping 2 100 2 100
set_clipping 150 100 150 100
;;
1|a4|A4) PAPER=1; paper=a4; XDIM="9920"; YDIM="7016"
set_clipping 150 100 150 100
;;
2|b5jis|B5jis) PAPER=2; paper=b5; XDIM="8598"; YDIM="6070"
set_clipping 138 100 138 100 # modulo 256
;;
3|a5|A5) PAPER=3; paper=a5; XDIM="6992"; YDIM="4960"
set_clipping 168 100 168 100 # modulo 256
;;
4|letter) PAPER=4; paper=letter; XDIM="10200"; YDIM="6600"
set_clipping 150 100 150 100
;;
5|executive) PAPER=5; paper=executive; XDIM="8700"; YDIM="6300"
set_clipping 150 100 150 100
;;
6|fanfoldgermanlegal|folio)
PAPER=6; paper=legal; XDIM="10200"; YDIM="7800"
set_clipping 150 100 150 100
;;
7|legal) PAPER=7; paper=legal; XDIM="10200"; YDIM="8400"
set_clipping 150 100 150 100
;;
9|"env#10") PAPER=9; paper=env10; XDIM="4950"; YDIM="5700"
set_clipping 171 100 171 100 # modulo 256
;;
10|envMonarch) PAPER=10; paper=envMonarch;XDIM="4650"; YDIM="4500"
set_clipping 150 100 150 100
;;
11|envC5) PAPER=11; paper=envC5; XDIM="7650"; YDIM="5408"
set_clipping 150 100 150 100
;;
12|envDL) PAPER=12; paper=envDL; XDIM="5200"; YDIM="5200"
set_clipping 168 100 168 100 # modulo 256
;;
#24|folio) PAPER=24; paper=folio; XDIM="9922"; YDIM="7796"
# set_clipping 150 100 150 100
# ;;
#26|"env#9") PAPER=26; paper=env9; XDIM="4496"; YDIM="5324"
# set_clipping 200 100 200 100 # modulo 256
# ;;
#23|envC6) PAPER=23; paper=envC6; XDIM="5386"; YDIM="3826"
# set_clipping 150 100 150 100
# ;;
#12|b5iso|B5iso) PAPER=12; paper=b5; XDIM="8314"; YDIM="5906"
# set_clipping 189 100 189 100 # modulo 256
# ;;
#25|env6.75) PAPER=25; paper=env6.75; XDIM="4348"; YDIM="3900"
# set_clipping 150 100 150 100
# ;;
#17|a6|A6) PAPER=17; paper=a6; XDIM="4960"; YDIM="3496"
# set_clipping 176 100 176 100 # modulo 256
# ;;
#28|oficio) PAPER=28; paper=a6; XDIM="10200"; YDIM="8100"
# set_clipping 150 100 150 100
# ;;
*) error "Unimplemented paper code $PAPER";;
esac
# e.g. /usr/share/ghostscript/7.07/lib/gs_statd.ps
PAPERSIZE="-sPAPERSIZE=$paper";
case "$RES" in
600x600) XDIM=`expr $XDIM / 2`;;
1200x600) ;;
1200x1200) YDIM=`expr $YDIM \* 2`;;
2400x600) XDIM=`expr $XDIM \* 2`;;
esac
DIM="${XDIM}x${YDIM}"
#
# Filter thru psnup if N-up printing has been requested
#
case $NUP in
[234689]|1[024568]) PREFILTER="nup";;
*) PREFILTER=cat;;
esac
if [ "$DEBUG" -ge 9 ]; then
PREFILTER="tee /tmp/$BASENAME.ps"
fi
#
# Overload -G. If the file name ends with ".icm" or ".ICM"
# then convert the ICC color profile to a Postscript CRD,
# then prepend it to the users job. Select the intent
# using the -I option.
#
create_crd() {
#
# Create a Postscript CRD
#
ICC2PS=$PREFIX/bin/foo2zjs-icc2ps
if [ -x $ICC2PS ]; then
case "$GAMMAFILE" in
none | none.icm | */none.icm)
;;
*)
if [ -x /usr/bin/logger ]; then
logger -t "$BASENAME" -p lpr.info -- \
"`basename $ICC2PS` -o $GAMMAFILE -t$INTENT > $ICCTMP.crd.ps"
fi
$ICC2PS -o $GAMMAFILE -t$INTENT > $ICCTMP.crd.ps 2>$ICCTMP.log \
|| error "Problem converting .ICM file to Postscript"
;;
esac
PSTOPS_OPTS="$PSTOPS_OPTS -c"
cat > $ICCTMP.usecie.ps <<-EOF
%!PS-Adobe-3.0
<</UseCIEColor true>>setpagedevice
EOF
if [ "$QUALITY" = wts -o "$QUALITY" = as ]; then
if [ "$QUALITY" = wts ]; then
cat >> $ICCTMP.usecie.ps <<-EOF
<< /UseWTS true >> setuserparams
EOF
else
cat >> $ICCTMP.usecie.ps <<-EOF
<< /UseWTS false >> setuserparams
EOF
fi
cat >> $ICCTMP.usecie.ps <<-EOF
<<
/AccurateScreens true
/HalftoneType 1
/HalftoneName (Round Dot Screen) cvn
/SpotFunction { 180 mul cos exch 180 mul cos add 2 div}
/Frequency 137
/Angle 37
>> sethalftone
EOF
fi
cat > $ICCTMP.selcrd.ps <<-EOF
/Current /ColorRendering findresource setcolorrendering
EOF
case "$GAMMAFILE" in
none | none.icm | */none.icm) GAMMAFILE="$ICCTMP.usecie.ps";;
*) GAMMAFILE="$ICCTMP.usecie.ps $ICCTMP.crd.ps $ICCTMP.selcrd.ps";;
esac
else
GAMMAFILE=
fi
}
if [ $DEBUG -gt 0 ]; then
ICCTMP=/tmp/icc
else
ICCTMP=/tmp/icc$$
fi
if [ "" = "$COLOR" ]; then
COLORMODE=
GAMMAFILE=
else
case "$COLORMODE" in
default) COLORMODE=$DEFAULTCOLORMODE;;
esac
case "$GAMMAFILE" in
default) GAMMAFILE=samclp300-0.icm;;
esac
fi
CRDBASE="$PREFIX/share/foo2hbpl/crd"
case "$MODEL" in
0) model=CLP-300;;
1) model=CLP-600;;
2) model=CLP-600;;
3) model=CLP-600;;
esac
case "$RES" in
600x600) SCREEN=$model-600x600cms2;;
1200x600) SCREEN=$model-1200x600cms2;;
1200x1200) SCREEN=$model-1200x1200cms2;;
esac
PSTOPS_OPTS="-n"
case "$COLORMODE" in
0|"")
# Monochrome
;;
10|icm)
# Use old ICM method
AIB=-A
BC=-B
case "$GAMMAFILE" in
none | none.icm | */none.icm)
create_crd
;;
*.icm|*.ICM|*.icc|*.ICC)
#
# Its really an .ICM file, not a gamma file.
#
# The file can be a full path name, or the name of a file in $SHARE/icm/
#
if [ -r "$GAMMAFILE" ]; then
create_crd
elif [ -r "$SHARE/icm/$GAMMAFILE" ]; then
GAMMAFILE="$SHARE/icm/$GAMMAFILE"
create_crd
else
GAMMAFILE=
fi
;;
esac
;;
1|crd)
# CRD
GAMMAFILE=""
GAMMAFILE="$GAMMAFILE $CRDBASE/${model}cms"
GAMMAFILE="$GAMMAFILE $CRDBASE/$SCREEN"
# Black text...
TMPFILE2=/tmp/black$$
cat $CRDBASE/black-text.ps - >$TMPFILE2
exec <$TMPFILE2
;;
*.crd)
GAMMAFILE="$CRDBASE/prolog.ps"
if [ -f $COLORMODE ]; then
GAMMAFILE="$GAMMAFILE $COLORMODE"
elif [ -f $CRDBASE/$COLORMODE ]; then
GAMMAFILE="$GAMMAFILE $CRDBASE/$COLORMODE"
else
error "Can't find CRD '$COLORMODE' in . or in $CRDBASE"
fi
GAMMAFILE="$GAMMAFILE $CRDBASE/$SCREEN"
;;
*)
error "Unknown color method '$COLORMODE'"
;;
esac
if [ "$COLOR" != "" -a "$QUALITY" = wts ]; then
PSTOPS_OPTS="$PSTOPS_OPTS -w"
elif [ "$COLOR" != "" -a "$QUALITY" = as ]; then
PSTOPS_OPTS="$PSTOPS_OPTS -a"
fi
if [ "" != "$COLOR" ]; then
if [ "" = "$AIB" -a "" = "$BC" ]; then
# Faster, but can't handle AllIsBlack or BlackClears
GSDEV=-sDEVICE=pksmraw
else
# Can't handle different size pages
GSDEV=-sDEVICE=bitcmyk
fi
fi
#
# Figure out USERNAME
#
if [ "$LPUSER" != "" ]; then
USER="$LPUSER@$LPHOST"
else
USER=""
fi
#
# Main Program, just cobble together the pipeline and run it
#
# The malarky with file descriptors 1 and 3 is to avoid a bug in
# (some versions?) of Ghostscript where Postscript's stdout gets
# intermingled with the printer drivers output, resulting in
# corrupted image data.
#
GS="$GSBIN -q -dBATCH -dSAFER -dQUIET -dNOPAUSE -dNOINTERPOLATE"
foo2zjs-pstops $PSTOPS_OPTS | \
$PREFILTER \
| ($GS $PAPERSIZE -g$DIM -r$RES $GSDEV $GSOPTS \
-sOutputFile="|cat 1>&3" $GAMMAFILE -_ >/dev/null) 3>&1 \
| foo2hbpl2 -r$RES -g$DIM -p$PAPER -m$MEDIA -n$COPIES -d$DUPLEX -s$SOURCE \
-z$MODEL $COLOR $CLIP_UL $CLIP_LR $CLIP_LOG $SAVETONER \
-J "$LPJOB" -U "$USER" \
$BC $AIB $COLOR2MONO $NOPLANES $EXTRAPAD -D$DEBUG
#
# Log the command line, for debugging and problem reports
#
if [ -x /usr/bin/logger ]; then
logger -t "$BASENAME" -p lpr.info -- \
"$GSBIN $PAPERSIZE -g$DIM -r$RES $GSDEV $GSOPTS $GAMMAFILE"
logger -t "$BASENAME" -p lpr.info -- \
"foo2hbpl2 -r$RES -g$DIM -p$PAPER -m$MEDIA \
-n$COPIES -d$DUPLEX -s$SOURCE -z$MODEL $COLOR $CLIP_UL $CLIP_LR $CLIP_LOG \
$SAVETONER $BC $AIB $COLOR2MONO $NOPLANES $EXTRAPAD"
fi
#
# Remove cruft
#
if [ $DEBUG -eq 0 ]; then
for i in crd.ps log usecie.ps selcrd.ps
do
file="$ICCTMP.$i"
[ -f $file ] && rm -f $file
done
[ -f "$TMPFILE" ] && rm -f $TMPFILE
[ -f "$TMPFILE2" ] && rm -f $TMPFILE2
fi
exit 0
Mini Shell